Thermal motor protection relay 1 changeover contact - Motor temperature monitor 1 circuits 3RN200...

3RN2000-1AA30 4047621004389 EAN/GTIN DE 23691322 WEEE

Our best price
$48.59 excl. VAT
$88.03 (-44.8% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Thermal motor protection relay 1 changeover contact 3RN2000-1AA30 With removable terminals,... more
Thermal motor protection relay 1 changeover contact - Motor temperature monitor 1 circuits 3RN200... – Siemens – 4047621004389: Thermal motor protection relay 1 changeover contact 3RN2000-1AA30 With removable terminals, number of measuring circuits 1, number of contacts as NC contacts 0, number of contacts as NO contacts 0, number of contacts as changeover contacts 1, connection type of auxiliary circuit screw connection, rated control supply voltage Us 24 ... 24V , type of voltage for actuation AC/DC, height 100mm, width 17.5mm, depth 90mm, thermistor motor protection relay compact evaluation device 17.5 mm housing, screw connection, 1 changeover contact, US = AC/DC 24 V, auto-RESET, suitable for Bimetallic switch, supply=output voltage, 1 LED (TRIPPED) SIRIUS 3RN2 thermistor motor protection relay for protecting motors from overheating by direct temperature measurement. The direct measurement of the motor winding temperature enables a motor to be protected even under unusual conditions such as heavy starting, braking, frequent switching or insufficient cooling and thus saves the motor from being oversized as a precaution. The use of PTC sensors or bimetallic switches means that the devices do not need to be parameterised. LEDs enable quick error diagnosis. The devices are climate-proof, safe to touch and can be used worldwide thanks to the wide voltage range and international approvals. Available as monostable or bistable evaluation devices, with and without ATEX approval, with one or two sensor circuits and with auto manual and/or remote RESET. The devices are available with screw or spring-loaded technology (push-in). There are versions with a width of 17.5 mm or 22.5 mm, for TH35 top-hat rail or for screw mounting with adapter (accessories) and with hard gold-plated contacts. Uniform accessories for all device variants, such as removable terminals, push-in lugs and coding pins, simplify selection and storage. The 3RN2 thermistor motor protection relays replace the proven 3RN1 series. SIRIUS relay - a program for all cases.
... more
With removable clamps yes
Number of measuring circuits 1
Number of contacts as changer 1
Connection type auxiliary circuit Screw
External reset possible no
Error storage possible no
Rated control supply voltage Us 24V
Voltage type for actuation AC/DC
Height 100 mm
Width 17.5 mm
Depth 90 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Thermal motor protection relay 1 changeover contact - Motor temperature monitor 1 circuits 3RN200..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.