Engine starter - Direct starter combination 0,75kW 3RK1395-6KS41-0AD0
3RK1395-6KS41-0AD0
4011209823921
EAN/GTIN
DE 23691322
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Motor starter 3RK1395-6KS41-0AD0 Type of motor starter DOL starter, With short-circuit release,...
more
Engine starter - Direct starter combination 0,75kW 3RK1395-6KS41-0AD0 – Siemens – 4011209823921: Motor starter 3RK1395-6KS41-0AD0 Type of motor starter DOL starter, With short-circuit release, Rated control supply voltage Us at DC 20.4 ... 28.8V, Type of voltage for actuation DC, Rated operational power at AC-3, 400 V 0.75kW, Rated operational current Ie 2A, Rated operational current at AC-3, 400 V 2A, overload release current setting 0.15 ... 2A, tripping class other, connection type main circuit other, design of electrical connection for auxiliary and control circuit other, type of coordination according to IEC 60947-4-3 class 2, degree of protection (IP ) IP65, width 294mm, height 215mm, depth 148mm, SIRIUS motor starter M200D technology module direct starter mechanically switching AC-3, 0.75KW / 400V 0.15A...2.00A electronic overload protection thermistor: THERMOCLICK / PTC without brake contact 4DI / 2DO Han Q4/2 - Han Q8/0 using the 3RK1305* communication module can be used on the PROFIBUS or PROFINET motor starter SIRIUS M200D for starting, monitoring and protecting motors and loads for use tz in the field and for fully TIA-integrated, highly automated applications, e.g. in conveyor technology. The robust motor starters with a high degree of protection for PROFIBUS/PROFINET communication are easy to configure and, thanks to the modular starter concept and pre-assembled cables, can be installed and commissioned quickly and without errors will. In the event of service, a cost-effective and quick device replacement is possible thanks to modularity and automatic subsequent parameterization. The integration of associated sensors is supported. The use of the devices increases system availability thanks to a comprehensive diagnostics concept and sophisticated system monitoring. The Motor Starter ES software is available for configuration, commissioning, operation and diagnostics. PROFIenergy supports active and efficient energy management. The motor starters are approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready. Available as direct or reversing starters with different motor current ranges, optionally with electromechanical or electronic switching, optionally with brake control or local manual on-site operator panel. Additionally A communication module is required for communication via PROFINET or PROFIBUS. A comprehensive range of accessories suitable for all M200D motor starters is available, eg pre-assembled cables. SIRIUS M200D - The robust motor starter for decentralized drive solutions.
...
more
Type of motor starter | Direct starter (DOL) |
With short-circuit release | yes |
Voltage type for actuation | DC |
Rated operational current Ie | 2 A |
Rated operating current at AC-3, 400 V | 2 A |
Overload release Current setting | 0.15..2 A |
Temperature compensated overload protection | yes |
Trip class | other |
Connection type main circuit | other |
Rail mounting possible | no |
With transformer | no |
Number of command points | 4 |
Suitable for EMERGENCY STOP | no |
Assignment type according to IEC 60947-4-3 | Class 2 |
Number of indicator lights | 12 |
External reset possible | yes |
With fuse | no |
IP protection) | IP65 |
Protection class (NEMA) | 12 |
Supports protocol for TCP / IP | no |
Supports protocol for PROFIBUS | yes |
Supports protocol for CAN | no |
Supports protocol for INTERBUS | no |
Supports protocol for ASI | no |
Supports protocol for MODBUS | no |
Supports data highway protocol | no |
Supports protocol for DeviceNet | no |
Supports protocol for SUCONET | no |
Supports protocol for LON | no |
Supports protocol for PROFINET IO | yes |
Supports protocol for PROFINET CBA | no |
Supports protocol for SERCOS | no |
Supports protocol for EtherNet / IP | no |
Supports protocol for DeviceNet Safety | no |
Supports protocol for INTERBUS safety | no |
Supports protocol for PROFIsafe | no |
Supports protocol for SafetyBUS p | no |
Width | 294 mm |
Height | 215 mm |
Depth | 148 mm |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking