Converter Sinamics 0.75kW with filter - Frequency converter 200...240V 0,75kW 6SL3210-5BB17-5BV1

Converter Sinamics 0.75kW with filter - Frequency converter 200...240V 0,75kW 6SL3210-5BB17-5BV1 – Siemens – 4042948669853: Converter SINAMICS 0.75kW with filter 6SL3210-5BB17-5BV1 line voltage 200 ... 240V, line frequency 50/60 Hz, number of input phases 1, number of output phases 3, max. output frequency 550Hz, max. output voltage 240V, rated output current I2N 4.2A, max. power delivered at square. Load at rated output voltage 0.75kW, Max. power output with linear load at rated output voltage 0.75kW, Relative symmetrical mains frequency tolerance -5%, Relative symmetrical mains voltage tolerance -15%, Number of analogue outputs 1, Number of analogue inputs 2, Number of digital outputs 2, Number of digital inputs 4, With control element, Can be used in industrial areas, Can be used in residential and commercial areas, Supports protocol for MODBUS, Supports protocol for other bus systems, Number of HW interfaces Industrial Ethernet 0, Number of interfaces PROFINET 0, Number of HW interfaces serial RS-232 1 Number of HW interfaces serial RS-422 0 Number of HW interfaces serial RS-485 1 Number of HW interfaces serial TTY 0 Number of HW interfaces USB 0 Number of parallel HW interfaces 0, number of other HW interfaces 1, type of converter U converter, degree of protection (IP) IP20, height 1 42mm, width 68mm, depth 127.8mm, SINAMICS V20 200-240V 1-phase AC - 10/+ 10 rated power 0.75kW/1hp with 150% overload for 60s integrated filter C1 I/O interface : 4 DI, 2 DO, 2 AI, 1 AA Fieldbus: USS/MODBUS RTU with built-in BOP Degree of protection IP20/UL open Size: comp. AB 68x142x128 (Bx frequency converter SINAMICS V20. Simple. Robust. Efficient. For industrial applications and commercial applications in the voltage range 1AC 200 V to 240 V. SINAMICS V20 is characterized by short commissioning times, simple operation, robustness and cost efficiency. The converter can be used without additional modules can be operated directly from the packaging. To increase energy efficiency, the converter is equipped with an energy-optimized control process with automatic flux reduction. It also displays the current energy consumption and has other integrated energy-saving functions. The keep-running mode enables stable operation even with difficult and fluctuating grid conditions.The converter is available in nine frame sizes in a power range from 0.12 kW to 30 kW for operation on single and three-phase grids (1AC 200 V to 240 V, 3AC 380 V to 480 V).The SINAMICS V20 can be configured using various options such as loka le control unit Basic Operator Panel (BOP) or mobile control unit SINAMICS V20 Smart Access Module, BOP interface, standard network cable, line filter, braking resistors, shielding, etc. can be individually adapted to the requirements of the application. It also enables simple system configuration with predefined macros in the converter and ready-made function blocks from the Totally Integrated Automation Portal (TIA Portal) for quick connection to a SIMATIC S7-1200 controller, for example. The SINAMICS V20 basic converter is a technical and economical alternative to the Micromaster 420 frequency converter. SINAMICS - simply my drive.