SpaceLogic KNX IP cut. DIN rail - KNX Ethernet Interface for home automation MTN6502-0105

SpaceLogic KNX IP cut. DIN rail - KNX Ethernet Interface for home automation MTN6502-0105 – Merten – 3606489917852: SpaceLogic KNX IP cut. DIN rail MTN6502-0105 bus system KNX, other bus systems without, Ethernet version, REG mounting type, width in modular units 1, other material, other material quality, surface untreated, surface design not applicable, color white, max. transmission rate 9600Bd, with bus coupling, With labeling field, with LED display, degree of protection (IP) IP20, Spacelogic KNX IP interface DIN rail. The Spacelogic KNX IP Interface is an interface between IP and KNX. You can access the KNX bus from any point in your LAN. The Spacelogic KNX IP Interface can be used as a programming interface for the ETS 5 software and allows access to the KNX bus over the Internet via a VPN. The device supports KNX Security, which can be activated in the ETS. With its interface functionality (tunneling), the KNX Security prevents unauthorized access. The device supports up to 8 tunneling channels. A separate individual address must be configured for each tunneling channel. With 2 integrated pushbuttons to select the tunnel channel and 3 status LEDs. The interface is supplied with power via the KNX bus. An additional power supply is not required. For mounting on top-hat rails TH35 according to EN 60715. The bus is connected via a bus connection terminal. The connection to the LAN network is made via the RJ45 socket. Device width - 1 module = approx. 18 mm. Note - This application requires ETS 5 or higher. Contents - With bus connection terminal and cable cover.