KNX presence detector ARGUS, 360 degrees, including bus coupling unit 630819

630819 4042811072209 EAN/GTIN DE 33842582 WEEE

Our best price
$90.38 excl. VAT
$145.41 (-37.84% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Presence detector pws KNX ARGUS 630819 bus system KNX, other bus systems without, version... more
KNX presence detector ARGUS, 360 degrees, including bus coupling unit 630819 – Merten – 4042811072209: Presence detector pws KNX ARGUS 630819 bus system KNX, other bus systems without, version presence detector, mounting type flush-mounted, material plastic, material quality other, surface untreated, design of the surface matt, color white, RAL number (similar) 9010, with bus coupling, creep-by protection/rear field monitoring, Staircase monitoring, response brightness adjustable, optimum installation height 2.5m, max. range to one side 7m, max. frontal range 7m, detection field diameter on the floor 14m, horizontal detection angle 0 ... 360°, number of channels 5, number of binary inputs 0 , min. duty cycle 1s, max. duty cycle 15300min, min. depth of device box 46mm, indoor presence detection. If the KNX ARGUS Presence detects small movements in the room, data telegrams are sent via KNX, e.g. to control lighting, blinds or heatingxx With brightness-dependent motion detection for lighting control, the device constantly checks the brightness in the room. If there is sufficient natural light, the device switches off the artificial light even if a person is present. The run-on time can be set via the ETS. With integrated bus coupler. For ceiling mounting in a 60 mm socket, optimal use at 2.5 m. Can also be mounted on ceilings with the surface-mounted housing for ARGUS presence. KNX software functions: Five movement/presence blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, security pause, locking function. Four motion sensors: Sensitivity and range can be set separately for each sensor. Learnable staircase lighting time. Actual brightness value: Can be recorded via the internal and/or an external light sensor. actual value correction. Detection angle: 360 degrees. Range: Radius of max. 7 m (at a mounting height of 2.50 m). Number of levels: 6. Number of zones: 136 with 544 switching segments. Number of motion sensors: 4, separately adjustable. Light sensor: internal light sensor continuously adjustable from approx. 10 to 2000 lux (ETS), external light sensor via KNX. EC directives: Low Voltage Directive 2006/95/EG and EMC Directive 2004/108/EG. Accessories: Surface-mounted housing for ARGUS Presence 550619. Scope of delivery: With bus connection terminal and support plate. Colour: polar white.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Presence detector
Mounting Flush
Material Plastics/Electronics
Material quality other
Surface protection untreated
Execution of the surface frosted
Colour polar white
RAL number (similar) 9010
Transparent no
With bus coupling yes
Extension input no
Undercrawl / Rearfield yes
Mode switch no
Animal zone no
Staircase monitoring yes
Adjustable response brightness yes
Teach function for response brightness no
Off-delay self-learning no
Optimum mounting height 2.5 m
Max. Range to one page 7 m
Max. Range frontal 7 m
Detection field diameter on floor 14 m
Detection angle horizontal 0..360 °
Amount of channels 5
Minimum duty cycle 1 s
Max. Duty cycle 15300 min
Min. depth of the device socket 46 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX presence detector ARGUS, 360 degrees, including bus coupling unit 630819"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.