Repair switch - Off-load switch 3-p 20A KH20 T203/40 KS11V

Kraus & Naimer - KH20 T203/40 KS11V - Repair switch - Off-load switch 3-p 20A KH20 T203/40 KS11V
Photo source: fig. possibly similar
KH20 T203/40 KS11V 9004257087945 EAN/GTIN DE 21630058 WEEE

$50.76 excl. VAT
$69.13 (-26.57% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Number of poles=3, With zero (off) position=yes, Rated permanent current Iu=20 A, Rated operation... more
Repair switch - Off-load switch 3-p 20A KH20 T203/40 KS11V – Kraus & Naimer – 9004257087945: Number of poles=3, With zero (off) position=yes, Rated permanent current Iu=20 A, Rated operation power at AC-3, 400 V=6,5 kW, Degree of protection (IP), front side=IP67, Number of auxiliary contacts as normally closed contact=1, Number of auxiliary contacts as normally open contact=1
... more
Number of poles 3
With zero position yes
Rated continuous current Iu 20 A
Rated operating power at AC-3, 400V 6.5 kW
Degree of protection (IP), front side IP67
Number of auxiliary contacts as NC contact 1
Number of auxiliary contacts as normally open 1

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Repair switch - Off-load switch 3-p 20A KH20 T203/40 KS11V"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.