KNX RF button 1-fold Duroplast, LS series - Touch sensor for bus system 2-fold LS 10911 ST RF

KNX RF button 1-fold Duroplast, LS series - Touch sensor for bus system 2-fold LS 10911 ST RF – Jung – 4011377194618: KNX RF button 1-fold duroplast, series LS LS 10911 ST RF, bus system KNX=yes, bus system KNX radio=yes, bus system radio bus=no, bus system LON=no, bus system Powernet=no, radio bidirectional=yes, mounting type=flush-mounted, with Anti-theft/dismantling protection=no, number of actuation points=2, number of buttons=1, with LED display=yes, with labeling field=no, with display=no, material=plastic, material quality=duroplast, surface protection=other, design of Surface=glossy, RAL number (similar)=1013, transparent=no, with room thermostat=yes, with infrared sensor=no, protection class (IP)=IP20, for inserts ''Blind'' item no.: 1730 JE and 1731 JE for ''light'' inserts, item no.: 1701 SE, 1701 PSE, 1702 SE, 1704 ESE, 1710 DE, 1711 DE, 1712 DE, 1713 DSTE, 1723 NE for room thermostat insert item no. No.: 1790 RTR Intended use Operating consumers, e.g. B. light on/off, dimming of brightness and color temperature, blinds up/down, 1-byte, 2-byte, 3-byte and 6-byte value transmitters, brightness values, temperatures, retrieval and storage of light scenes Control of the room temperature Operation in wired KNX systems via Media coupler (Art. No.: MK 100 RF) Operation with system insert for switching, dimming, blinds, for DALI, room temperature control or with a 3-wire extension Color temperature control of lighting, with DALI push-button controller TW Control of the room temperature, with room thermostat insert Operation with extension 2- or 3-wire, rotary extension or pushbutton Push-button functions adjustable: switching, dimming, blinds, value transmitter, scene extension, 2-channel operation and controller extension Operating concept (rocker or button) can be set for each control surface Button evaluation (single-surface operation or between single-surface operation) adjustable One or two functions per control surface Controller extension with operating mode switchover, forced operating mode switchover, presence function and setpoint shift can be set Status LED optionally red, green, blue can be set per rocker LED functions Orientation lighting and night reduction can be set separately Brightness of the status LED can be set and switchable during operation Locking function: Locking or function switching of all or individual key functions Internal sensor for temperature measurement, can only be used with the following inserts: Item nos. 1701 SE, 1701 PSE, 1704 ESE, 1713 DSTE, 1731 JE, 1730 JE, 1790 RTR, 1723 NE Improved temperature measurement by including external temperature values via communication object Commissioning with ETS from version 5.7.5 A labeling order from the GRAPHIC TOOL must be submitted together with the order done: www.jung.de/gt Subsequent labeling of the buttons is not possible. KNX KNX medium: RF1.R Security: X-Mode Commissioning mode: S-Mode Radio frequency: 868.0 ... 868.6 MHz Transmission power: max. 20 mW Transmission range in the open air: typ. 100 m Receiver category: 2 Ambient conditions Ambient temperature: - 5 ... +45 °C Storage/transport temperature: -25 ... +70 °C Relative humidity: max. 93% (no condensation) Material: Duroplast Dimensions (W x H): 70 x 70 mm