Radio switching/blind actuator REG 8f 4f - Sunblind actuator for bus system 4-ch 543500

Radio switching/blind actuator REG 8f 4f - Sunblind actuator for bus system 4-ch 543500 – Gira – 4010337774280: Radio switching/blind actuator REG 8f 4f 543500 bus system radio bus, other bus systems eNet, installation type REG, width in division units 4, number of inputs 3, switching current ohmic 16A, max. switching power 2300W, max. number of blind outputs 4, function switching, current type AC , Protection class (IP) IP20, eNet radio switching or push button actuator 8-fold blind actuator 4-fold REG Features: Can be set with eNet server:: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0. Control locks. Update the device software. The eNet radio switching, push button or blind actuator receives telegrams via a data line from the eNet radio receiving module or eNet server to switch lighting or control electrically operated blinds. Two outputs are operated in the same operating mode (switching, buttons, blinds or roller shutters). Switching lighting or single-phase fan motors. Controlling electrically operated blinds, such as E.g. blinds, roller shutters or awnings. Operating modes: switching actuator, push-button actuator per output or blind actuator, roller shutter actuator adjustable for paired outputs. Status feedback to eNet radio transmitter. Scene operation. Button operating mode: Relay contact remains closed as long as telegrams are received (max. 60 seconds). Positioning of blinds and slats via scene call. Positions for sun protection and twilight can be saved. Threshold scenes for sun protection, twilight and wind alarm. Curtain running time can be saved. Slat reversal time can be saved. Can be set with eNet Server:: Flashing function. follow-up time. Switch-on or switch-off delay. Shutdown advance warning. Minimum switching repetition time. Permanent on, permanent off. Reversal time when changing direction. Running direction can be inverted (e.g. for roof windows). Position for sun protection, twilight, lock-out protection and wind alarm. Notes: To operate this modular device, an eNet radio receiver module or an eNet server is required.