Fingerprint reader keyless in sw - Touch operated lock for bus system 2617005

Fingerprint reader keyless in sw - Touch operated lock for bus system 2617005 – Gira – 4010337037132: Fingerprint reading unit Keyless In sw 2617005 Other bus systems other, design touch lock, type of installation flush-mounted, material plastic, material quality thermoplastic, surface other, design of the surface matt, color black, protection class (IP) IP20, Gira Keyless In fingerprint reading unit black matt Features: Installation in a device box. Stand-alone device or in combination with the Gira door communication system. In stand-alone operation, use of the integrated potential-free relay contacts for switching operations, e.g. B. for door openers with their own power supply (e.g. commercially available doorbell transformer). Commissioning through direct configuration without a PC or programming software. Inputs and outputs: Switch contact: Two relays with potential-free changeover contacts Load capacity AC DC 24 V 1.6 A. Two connections for power supply. Fingerprint module as a professional biometric access control system based on the new generation of area scan technology. Scanning of the deepest layer of skin with radio frequency. High detection rate and protection against manipulation. Evaluation of the unique characteristics of the living human finger. Live detection of the finger. The fingerprint reader can manage up to 99 fingers. Reliable detection of fingers, e.g. B. were slightly injured while gardening (only the top layer of skin was injured). Data protection through encryption procedures. Fast response time from putting on the finger to releasing it: up to 30 saved fingers approx. 1 s, up to 99 saved fingers approx. 3 s. Night design of the fingerprint area for orientation using white LED lighting. 360 support of the finger possible. 3-color LED status display for visual signaling during programming and operation. Master PIN number on the enclosed sealed security card if the administrator finger is no longer available. The device can be factory reset using the enclosed security card. Acknowledgment buzzer for acoustic signaling for users or installers. Acoustic warning tone in the event of unauthorized removal of the fingerprint attachment for sabotage detection. Sabotage circuit with switching actuator in the door communication system. Different fingers can be assigned to the two integrated changeover relays, e.g. B. Thumb: control of the door opening, index finger: switching of the exterior lighting. Inputs and outputs: connector strip connecting cable for Gira door communication system. Notes : The Keyless In devices can be connected to the Gira HomeServer with the DCS-IP gateway. This makes intelligent connections possible. So e.g. B. temporary or one-time access authorizations can be easily granted. All data, including access authorizations, can then be managed centrally and flexibly via the Gira HomeServer. Children's fingers can usually only be reliably recognized from the age of 6 years. Integration into profile 55 possible.