Room actuator 4/2-gang 16 A NO, manual, status - KNX heating actuator 75314019

Room actuator 4/2-gang 16 A NO, manual, status - KNX heating actuator 75314019 – Berker – 4011334306504: Room actuator 75314019 bus system KNX, other bus systems without, mounting type REG, width in modular units 4, with bus coupling, control variable constant, control variable switching, valve protection function, manual switching, number of binary inputs 0, max. switching current (resistive load) 16A, number of outputs 6, Max. output current 0.05A, switching voltage 230 ... 240V, degree of protection (IP) IP20, room actuator 4/2-fold 16 A closer, manual, status, REG KNX light grey. Room actuator 4/2-fold 16 A normally open, manual, status, REG, 4 outputs for switching independent loads or controlling 2 drives, with 4 potential-free normally open contacts can also be parameterized as normally closed, any mixed operation of drive and switching functions possible, for switching different ones Suitable for outer conductors, 2 additional electronic outputs (Triac) for connecting 230V thermoelectric actuators. For individual single room control. For constant (PI) or switching (2-point) control, with emergency program, e.g. in the event of sensor or bus failure, 4 manual control buttons for on/off (up/down) and bus function on/off per channel/device, manual operation even without a bus possible, for example, on the construction site, with programming button and red programming LED, with 6 red status LEDs and 3 red LEDs as manual actuation display, bus connection via connection terminal, with screw terminals.