Stepper controller RS 422 - Fieldbus function-/technology module 750-670

WAGO - 750-670 - Stepper controller RS 422 - Fieldbus function-/technology module 750-670
Photo source: fig. possibly similar
Photo source: fig. possibly similar
750-670 4045454539719 EAN/GTIN DE 40917098 WEEE

Our best price
$281.45 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Stepper controller RS 422 750-670 supply voltage at DC 24...24V, voltage type of the supply... more
Stepper controller RS 422 - Fieldbus function-/technology module 750-670 – WAGO – 4045454539719: Stepper controller RS 422 750-670 supply voltage at DC 24...24V, voltage type of the supply voltage DC, number of functions 0, number of HW interfaces Industrial Ethernet 0, number of PROFINET interfaces 0, number of HW interfaces serial RS-232 0 , Number of HW interfaces serial RS-422 1, Number of HW interfaces serial RS-485 0, Number of HW interfaces serial TTY 0, Number of HW interfaces parallel 0, Number of HW interfaces wireless 0, Number of HW interfaces USB 0, number of HW interfaces others 0, supports protocol for other bus systems, system components, degree of protection (IP) IP20, fieldbus connection via separate bus coupler possible, DIN rail mounting possible, explosion protection category for gas ATEX gas explosion protection, cat 3G, explosion protection category for dust ATEX dust explosion protection, category 3D, width 12mm, height 64mm, depth 100mm, The module is an intelligent stepper controller for controlling different drives eb power units with pulse direction interface or incremental encoder input. Both RS-422 and 24V or 20mA interfaces can be operated. Due to the high output frequency, stepper output stages with fine microstepping resolution can be used. In addition, the module can be used as a high-precision frequency or pulse width modulator. Two configurable inputs for start/stop, limit switch, reference cam, jog/tip etc. are evaluated directly and without further delay by the internal software. Functions that can be used flexibly, such as positioning with different acceleration ramps, command tables, cam controllers, auto-referencing and other event-dependent properties enable a wide range of applications. The interface for the programmer is the same for all modules in the WAGO stepper controller family. Additional operating modes: pulse width modulation. frequency generator. Single shot mode.
... more
Supply voltage at DC 24V
Voltage type of the supply voltage DC
Number of functions 2
Number of HW interfaces serial RS-422 1
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
IO-Link master no
System component yes
Suitable for counting no
Suitable for weighing no
Suitable for temperature control no
Suitable for welding control no
Suitable for pressure control no
Suitable for NC no
Suitable for position detection no
Suitable for CNC no
Suitable for SSI no
Suitable for incremental value acquisition no
Suitable for absolute value acquisition no
Suitable for flow control no
Suitable for flow measurement no
Suitable for railway control no
Suitable for cam control no
Suitable for flying saw no
Suitable for multi-axis control no
Suitable for single-axis control no
Suitable for multi-axis positioning no
Suitable for single-axis positioning no
Function block restart interlock no
Function block automatic reset no
Contactor control function block no
Function block EMERGENCY STOP no
Function block acknowledgment button no
Function block two-hand circuit no
Function block operating mode selection no
Function block access control no
IP protection) IP20
Frequency measurement no
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Width 12 mm
Height 100 mm
Depth 67.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Stepper controller RS 422 - Fieldbus function-/technology module 750-670"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.