Serial interface RS 232C/9600/N/8/1 - Fieldbus communication module 750-650

WAGO - 750-650 - Serial interface RS 232C/9600/N/8/1 - Fieldbus communication module 750-650
Photo source: fig. possibly similar
Photo source: fig. possibly similar
750-650 4045454394028 EAN/GTIN DE 40917098 WEEE

Our best price
$362.07 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Serial interface RS 232C/9600/N/8/1 750-650 system component, degree of protection (IP) IP20,... more
Serial interface RS 232C/9600/N/8/1 - Fieldbus communication module 750-650 – WAGO – 4045454394028: Serial interface RS 232C/9600/N/8/1 750-650 system component, degree of protection (IP) IP20, with electrical isolation, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, explosion protection category for gas ATEX gas explosion protection, cat. 3G , Explosion protection category for dust ATEX dust explosion protection, cat. 3D, width 12mm, height 64mm, depth 100mm, The interface integrated in the bus terminal enables devices with an RS-232-C interface to be connected. The connected device can communicate directly with the controller via the bus coupler used. The active communication channel works independently of the higher-level bus system in full duplex mode with up to 19200 baud. The RS-232-C interface guarantees a high level of immunity to interference thanks to galvanically isolated signals. The shield connection is routed directly to the mounting rail.
... more
Supply voltage at DC 5 V
Voltage type of the supply voltage DC
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for SERCOS no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard eGPRS no
Radio standard GSM no
Radio standard LTE no
Radio standard UMTS no
IO-Link master no
System component yes
IP protection) IP20
With electrical isolation yes
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Width 12 mm
Height 100 mm
Depth 69.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Serial interface RS 232C/9600/N/8/1 - Fieldbus communication module 750-650"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.