Cable connector Multi 12x Cat.7, 19 inch, RAL7035 - Adapter 12xVM8-8

Cable connector Multi 12x Cat.7, 19 inch, RAL7035 - Adapter 12xVM8-8 – Telegärtner – J00060A0072 – 4018359289454: Cable connector Multi 12x Cat.7, 19'', RAL7035 12xVM8-8 connection 1 other, connection 2 other, shielded, The VM 8-8 module Cat.7A is used as a connection/extension of commercially available shielded and unshielded twisted pair installation cables (Cat. 5e/Cat.6/Cat.6A/Cat.7/Cat.7A) used in the following applications: cable relocation, cable extensions, cable damage. When using the VM 8-8 Cat.7A module, the cable segments of structured cabling do not need to be rerouted. This reduces the change and costs to a minimum. Depending on the connection module type, up to 12 incoming and 12 outgoing 8-core cables can be firmly connected to one another without significantly affecting the transmission properties and limiting the maximum link lengths. Connection via LSA-Plus insulation displacement terminals on a common circuit board, color coding according to EIA/TIA 568A and B, connection of 4-pair shielded/unshielded installation and patch cables of AWG 27-22, pairs of wires can be routed to the terminal while maintaining the pair twist, secure Shield contacting with screw terminals directly on the circuit board, variable cable feeds, cable strain relief using commercially available cable ties (VM 8-8 Cat.7A (ISO/IEC)), tool-free attachment of the stainless steel shielding hoods (19 inch and AP version), surface-mounted (AP ) variant: Incoming and outgoing cables from the same direction, surface-mounted 19 inch and single version: incoming and outgoing cables offset by 180 degrees, grounding option directly on the circuit board (M4 screw), EMC-safe according to DIN EN 61000-6 -1 and 61000-6-2, connection via LSA-Plus insulation displacement terminals on a common circuit board, color coding according to EIA/TIA 568A and B, connection of 4-pair shielded/unshielded installation and patch cables of AWG 27-22, wire pairs can be retained the pair twist can be guided to the terminal, secure shield contact with screw terminals directly on the circuit board, variable cable feeds, cable strain relief using commercially available cable ties (VM 8-8 Cat.7A (ISO/IEC)), tool-free fastening of the shielding hoods made of stainless steel (19 inch and AP version), surface-mounted (AP) version: incoming and outgoing cables from the same direction, surface-mounted 19 inch and single version: incoming and outgoing cables offset by 180 degrees, grounding option directly on the circuit board (M4 screw), EMC-safe according to DIN EN 61000-6-1 and 61000-6-2, 1/2 HE -19 inch slide-in housing made of sheet steel, powder-coated light gray RAL 7035, no additional space is required for the cable extension in the floor distributor because of the space-saving 1/2 HE -Design, alternative wall mounting possible (pre-punched holes in the base plate), max. 12 incoming and 12 outgoing cables, cable entry and exit from the rear, 19 inch 1/2 HE multi-connection module for 12 shielded or unshielded installation cables, color: light gray RAL 7035, Multi 12x VM 8-8 Cat.7A (ISO/IEC)