Simatic DP 8DIO,24VDC,1.3A - Fieldbus digital module 8 In / 8 Out 6ES7147-6BG00-0AB0

Simatic DP 8DIO,24VDC,1.3A - Fieldbus digital module 8 In / 8 Out 6ES7147-6BG00-0AB0 – Siemens – 4025515078081: SIMATIC DP 8DIO,24VDC,1,3A 6ES7147-6BG00-0AB0 Supply voltage at DC 20.4...28.8V, type of supply voltage DC, number of digital inputs 8, number of digital outputs 8, digital inputs configurable, digital outputs configurable, input current for signal 1 7mA, permissible input voltage -3... 30V, type of input voltage DC, type of digital output other, output current 1.3A, permissible voltage at output 0... 28.8V, type of output voltage DC , short-circuit protection, outputs available, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 1, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS -485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, supports protocol for PROFINET IO , system component, degree of protection (IP) IP65/IP67, design of the electrical connection plug-in connection, delay time for signal change 1.2... 4.8ms, mounting rail mounting possible, wall/direct mounting possible, front mounting possible, SIL according to IEC 61508 2, performance level according to EN ISO 13849-1 Level d, explosion protection category for gas ATEX gas explosion protection, cat. 3G, explosion protection category for dust ATEX dust explosion protection, cat. 3D, width 60mm, height 175mm, depth 49mm, SIMATIC DP, ET 200ECO PN, 8 DIO DC 24V/1.3A 8xM12, degree of protection IP67 The SIMATIC ET 200eco PN is a compact block I/O with PROFINET connection in degree of protection IP65/67 for installation directly on the machine without a control cabinet. Due to the fully encapsulated die-cast zinc housing, the ET 200eco PN is mechanically very robust and resistant to vibrations, dust, oil and moisture and is therefore also suitable for outdoor use. Thanks to the ATEX approval, the ET 200eco PN can also be used in hazardous areas up to Zone 2. Due to their excellent robustness, there are many areas of application, especially in mechanical engineering and the automotive industry, as well as in particular on tool changing machines. In addition to digital and analog input and output modules in various forms (including current, voltage, temperature and resistance measurements), the portfolio also includes IO-Link masters and a fail-safe module for connecting sensors and actuators up to SIL 3 / PLe. If required, the outputs of the standard modules can also be switched off in an application-related fail-safe manner up to SIL 2. SIMATIC ET 200eco PN - Maximum robustness for the most adverse environmental conditions