Electronic ballast control dimmer switch, 1-10V SDS61/1-10V
SDS61/1-10V
61100800
4010312109496
EAN/GTIN
DE 30298319
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Control dimmer switch 1-10V, f.EVGs SDS61/1-10V compilation others, touch operation type of...
more
Electronic ballast control dimmer switch, 1-10V SDS61/1-10V – Eltako – 61100800 – 4010312109496: Control dimmer switch 1-10V, f.EVGs SDS61/1-10V compilation others, touch operation type of operation, load type capacitive load, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with timer/timer, flush-mounted type of installation, other type of attachment , material plastic, material quality thermoplastic, halogen-free, surface other, design of the surface matt, color blue, control voltage 230 ... 230V, connection type screw terminal, core cross section 4 ... 4mm², device width 45mm, device height 45mm, device depth 33mm, min. depth of Device socket 33mm, 1-10V control dimmer switch 1-10V for electronic ballasts. 1 NO contact not potential-free 600VA and 1-10V control output 40mA. Standby loss only 1 watt. Adjustable dimming speed. With children's room and snooze switch. With button or switch control. For flush mounting. 45mm long, 45mm wide, 33mm deep. Switching in the zero crossing to protect the contacts. Also for controlling LED converters with passive 1-10V interface without auxiliary voltage up to 0.6mA. Above that with auxiliary voltage. Switching and control voltage 230V. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. The load is switched on and off with a bistable relay at the EVG output. Switching capacity of fluorescent lamps or LV halogen lamps with electronic ballast 600VA. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. Short control commands switch on/off, permanent control changes the brightness up to the maximum value. An interruption of the control changes the dimming direction. The set brightness level is saved when the device is switched off. In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. The dimming speed can be set with the dimming speed rotary switch (only when controlled with a button). In the event that light switches cannot be replaced by light buttons, the rotary switch can be set to the switch symbol on the right stop: If the closed switch is briefly opened again, it is dimmed until it is briefly opened again. A change in the dimming direction takes place automatically at the two vertices. In addition, the direction can be changed by briefly opening the switch twice. With children's room circuit (only when controlled with a button): When switching on by pressing the button for a longer period of time, it is switched on with the lowest brightness after approx. With snooze function (only when controlled with a button): A double pulse dims the lighting from the current dimming setting down to minimum brightness and then switches it off. The maximum dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can be shortened accordingly. You can switch off at any time during the dimming process by briefly pressing the button. A long press during the dimming process dims up and ends the snooze mode.
...
more
Compilation | other |
Of operation | Tip button |
App control via Bluetooth | no |
Dimming Phase control | no |
Dimming Phase section | no |
Series dimmer | no |
Load type | capacitive load |
Extension input | no |
Light value memory | yes |
Suitable with button | yes |
Usable with motion detector | yes |
Suitable with presence detector | yes |
Usable with timer / timer | yes |
Suitable with radio button | no |
Usable with IR button | no |
Mounting | Flush |
Mounting | other |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | yes |
Surface protection | other |
Execution of the surface | frosted |
Colour | blue |
Transparent | no |
Control voltage | 230V |
Rated capacity resistive load | 400W |
Rated capacity inductive load | 400 VA |
Rated capacity capacitive load | 400 VA |
Max. switching capacity LED | 400W |
Connection | Screw terminal |
Core cross-section | 4 mm² |
Device width | 45 mm |
Device height | 45 mm |
Device depth | 33 mm |
Min. depth of the device socket | 33 mm |
Compatible with Apple HomeKit | no |
Compatible with Google Assistant | no |
Compatible with Amazon Alexa | no |
IFTTT support available | no |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking