Level monitor 24-240V 2W - Level relay conductive sensor RM35LM33MW

Level monitor 24-240V 2W - Level relay conductive sensor RM35LM33MW – Schneider Electric – 3389119405232: Level monitor 24-240V 2W RM35LM33MW Design of the electrical connection screw connection, rated control supply voltage Us at AC 50 Hz 24 ... 240V, rated control supply voltage Us at AC 60 Hz 24 ... 240V, rated control supply voltage Us at DC 24 ... 240V, type of voltage for actuation AC /DC, number of electrode inputs 3, min. adjustable on-delay time 0.1s, max. permissible on-delay time 5s, min. adjustable off-delay time 0.1s, max. permissible off-delay time 5s, response sensitivity adjustable, number of contacts as breakers 0, number of contacts as NO contact 0, number of contacts as changeover contact 2, physical measuring principle conductive, width 35mm, height 90mm, depth 72mm, Zelio Control. This level relay monitors the level of conductive, non-flammable liquids (conductive measuring principle) as a limit switch. It can also be used to control liquid levels in a 2-point control during filling and emptying. For this purpose, additional conductive level electrodes are hung in the tank. The measuring principle makes it possible to distinguish between liquid and foam. Two relay changeover contacts are available for reporting, which can be loaded up to 5 A. The limit value for the resistance value (250 Ohm-1 MOhm) and a time delay for the relay can be set. The settings are made using the controls on the front, which can be protected against changes under a transparent cover. 3 LEDs indicate the device status. The wide voltage power pack (24-240 VAC/DC) enables universal use. The cable connection is made via screw terminals.