Tubular motor RolloTube base 50Nm-12rpm emergency han - Tube mounted motor 50Nm RTBM 50/12HKZ

Tubular motor RolloTube base 50Nm-12rpm emergency han - Tube mounted motor 50Nm RTBM 50/12HKZ – Rademacher – 21605098 – 4031909012166: Tubular motor RolloTube base 50Nm-12U/min Not-Han RTBM 50/12HKZ outer diameter 60mm, torque 50Nm, octagonal steel shaft SW 50, octagonal steel shaft SW 60, octagonal steel shaft SW 70, for roller shutters, for awnings, for grooved tube shaft, max. roller shutter weight 134kg, type of limit switch mechanical, with driver, with adapter for shaft, length 624mm, The tubular motor Basis Medium RTBM 50/16HKZ is a mechanical tubular motor for roller shutters. With this tubular motor, the end points are adjusted mechanically with an adjustment tool (incl.) using the adjustment screws on the motor head. The motor is 624 mm long overall and the motor tube has a diameter of 45 mm. This model is characterized by the support of hand crank operation in the event of a power failure and is equipped with a corresponding adapter. The supply voltage is 230V (50Hz) and it is assigned to protection class IP 44. The tubular motor Basis Medium RTBM 50/16HKZ is equipped with a 2.5 m long connection cable and an awning drive bearing with thread M6 on a pitch circle of 48 mm or M8 on a pitch circle of 60 mm. It is pre-adapted for an octagonal steel shaft with a wrench size of 60. With the available accessories, it can also be used for octagonal steel shafts with wrench sizes of 50 and 70 mm, round shafts with a diameter of 50 mm, grooved tubes with flat/round/MHZ grooves with a diameter of 78 mm, grooved tubes with a flat/round groove with a diameter of 85 mm, siral shafts with a diameter of 50 mm and the Eckermann profile shaft with a diameter of 65 mm. The torque is 50 Nm and the speed is 12 rpm.