Tubular motor for roller shutters or awnings, RolloTube Basis Medium 20Nm-16rpm RTBM 20/16Z

Tubular motor for roller shutters or awnings, RolloTube Basis Medium 20Nm-16rpm RTBM 20/16Z – Rademacher – 21602096 – 4031909012029: Tubular motor RolloTube Basis Medium 20Nm-16U/min RTBM 20/16Z outer diameter 60mm, torque 20Nm, octagonal steel shaft SW 50, octagonal steel shaft SW 60, octagonal steel shaft SW 70, for roller shutters, for awnings, for grooved tubular shaft, max. roller shutter weight 49kg, type of limit switch mechanical, With driver, with adapter for shaft, length 474mm, The tubular motor Basis Medium RTBM 20/16Z is a mechanical tubular motor for roller shutters. With this tubular motor, the end points are adjusted mechanically with an adjustment tool (incl.) using the adjustment screws on the motor head. The motor is 474 mm long overall and the motor tube has a diameter of 45 mm. It fits in every RADEMACHER click drive bearing. The supply voltage is 230V (50Hz) and it is assigned to protection class IP 44. The tubular motor Basis Medium RTBM 20/16Z is equipped with a 2.5 m long connection cable and the angled and height-adjustable Click prefabricated box bearing. It is pre-adapted for an octagonal steel shaft with a wrench size of 60. With the available accessories, it can also be used for octagonal steel shafts with a wrench size of 50 and 70 mm, round shafts with a diameter of 50 mm, grooved tubes with a flat/round/MHZ groove with a diameter of 78 mm, grooved tubes with a flat/round groove with a diameter of 85 mm, siral shafts with a diameter of 50 mm and the Eckermann profile shaft with a diameter of 65 mm. The torque is 20 Nm and the speed is 16 rpm.