Trigger mark sensor OBP120--2EP-IO-L - Contrast sensor 120mm OBP120-R100-2EP-IO-L

Trigger mark sensor OBP120--2EP-IO-L - Contrast sensor 120mm OBP120-R100-2EP-IO-L – Pepperl + Fuchs – 267075-100509 – 4050143046119: Trigger mark sensor OBP120-R100-2EP-IO-L design of the electrical connection cable, design of the switching output PNP/NPN, design of the switching function antivalent, width of the sensor 11mm, height of the sensor 44.5mm, length of the sensor 21.5mm, cuboid housing design, Laser protection class class 1, type of light laser diode, red light, nominal scanning range 120mm, degree of protection (IP) IP67, material of the optical surface plastic, material of the housing plastic, scanning range: 25 ... 120 mm, optical resolution: trigger mark [black, 6%] 1 mm Width on white background [white, 90%], contrast difference min. 50%, light emitter: laser diode, type of light: red, alternating light, signal output: 2 push-pull outputs, short-circuit-proof, protected against reverse polarity, overvoltage-proof, interface type: IO-Link (via C/Q = pin 4 ), Switching type: The switching type of the sensor can be switched. The delivery status is: C/Q - Pin4: NPN NO contact / light switching, PNP NC contact / dark switching, IO-Link /Q - Pin2: NPN NC contact / dark switching, PNP NO contact / light switching, connection: 2 m fixed cable, ambient temperature: -40 .. 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , flexible cable not suitable for drag chains