Isolating switching amplifier 1-channel, A: relay KHA6-SH-Ex1

Pepperl + Fuchs - KHA6-SH-Ex1 - Isolating switching amplifier 1-channel, A: relay KHA6-SH-Ex1
Photo source: fig. possibly similar
KHA6-SH-Ex1 046904 4050143058099 EAN/GTIN DE 19020045 WEEE

Our best price
$535.22 excl. VAT
$649.64 (-17.61% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switching amplifier 1 channel Type of power supply Active, Rated supply voltage at AC 230 ...... more
Isolating switching amplifier 1-channel, A: relay KHA6-SH-Ex1 – Pepperl + Fuchs – 046904 – 4050143058099: Switching amplifier 1 channel Type of power supply Active, Rated supply voltage at AC 230 ... 230V, Rated operation frequency 45 ... 65Hz, Number of inputs, according to NAMUR 0, Number of inputs, potential-free 1, Switching voltage 50V, Switching current 1A, Switching frequency 5Hz, Number of channels 1, Number of output circuits relays normally open contact 3, Number of output circuits relays change-over contact 0, Number of output circuits transistor potential-free 0, Number of output circuits transistor pnp 0, Number of output circuits transistor npn 0, Number of output circuits transistor antivalent 0, Number of output circuits opto-coupler 0, Galvanic separation between input and output, Galvanic separation between output to output, Galvanic separation between supply voltage and all other current circuits, Suitable for safety functions, Width 40mm, Height 93mm, Power consumption 2,3W, Operation temperature -20 ... 60°C, Construction type of device Built-in device, Type of electric connection Screw connection, Mounting method Snap mounting support rail, Depth 115mm, Degree of protection (IP) IP20
... more
Type of power supply active
Rated supply voltage at AC 230V
Rated operating frequency 45..65 Hz
Number of inputs, floating potential 1
Switching voltage 50V
Switching current 1 A
Switching frequency 5 Hz
Amount of channels 1
Number of output circuits Relay N.O. contact 3
Alarm output no
Galvanic isolation between the inputs no
Suitable for safety functions yes
SIL according to IEC 61508 3
Width 40 mm
Height 107 mm
Input 2.3 W
Operating temperatur -20..60 °C
Device Type Built-in device
Mounting Snap-on mounting rail
Depth 115 mm
IP protection) other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Isolating switching amplifier 1-channel, A: relay KHA6-SH-Ex1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.