Optical light barrier OBE20M--281004 - Transmitter and receiver light barrier OBE20M-R100-#281004

Pepperl + Fuchs - OBE20M-R100-#281004 - Optical light barrier OBE20M--281004 - Transmitter and receiver light barrier OBE20M-R100-#281004
Photo source: fig. possibly similar
OBE20M-R100-#281004 281004 4050143047734 EAN/GTIN DE 19020045 WEEE

$149.83 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Optical R100 light barrier OBE20M-R100-281004 Scope of delivery of the one-way system transmitter... more
Optical light barrier OBE20M--281004 - Transmitter and receiver light barrier OBE20M-R100-#281004 – Pepperl + Fuchs – 281004 – 4050143047734: Optical R100 light barrier OBE20M-R100-281004 Scope of delivery of the one-way system transmitter and receiver, max. switching distance 30000mm, design of the electrical connection M8 plug connector, design of the switching output PNP/NPN, cuboid housing, width of the sensor 11mm, height of the sensor 44.5mm, Length of the sensor 21.5mm, material of the optical surface plastic, material of the housing plastic, type of voltage DC, laser protection class class 1, wavelength of the sensor 680nm, type of light laser diode, red light, operating range: 0 ... 20 m, light transmitter: laser diode, type of light: red, alternating light, signal output: 2 push-pull outputs, short-circuit-proof, protected against reverse polarity, overvoltage-proof, interface type: IO-Link (via C/Q = pin 4), switching type: the switching type of the sensor can be switched. The delivery status is: C/Q - Pin4: NPN NO contact / dark switching, PNP NC contact / light switching, IO-Link /Q - Pin2: NPN NC contact / light switching, PNP NO contact / dark switching, connection: device connector M8 x 1, 4-pin, operating voltage : 10 ... 30 V DC, ambient temperature: -40 ... 60 °C (-40 ... 140 °F)
... more
Failure warning no
With time function no
Max. Switching distance 30000 mm
With reflector no
Analog output 0 V ... 10 V no
Analog output 0 mA ... 20 mA no
Analog output 4 mA ... 20 mA no
Analogue output -10 V ... +10 V no
With communication interface analog no
With communication interface AS-Interface no
With communication interface CANOpen no
With communication interface DeviceNet no
With communication interface Ethernet no
With communication interface INTERBUS no
With communication interface PROFIBUS no
With communication interface RS-232 no
With communication interface RS-422 no
With communication interface RS-485 no
With communication interface SSD no
With communication interface SSI no
Execution of the switching output PNP / NPN
Housing construction Cuboid
Width of the sensor 11 mm
Height of the sensor 44.5 mm
Length of the sensor 21.5 mm
Material of the optical surface Plastic
Material of the housing Plastic
Voltage DC
Laser protection class Class 1
Wavelength of the sensor 680 nm
Light Source Laser diode, red light

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Optical light barrier OBE20M--281004 - Transmitter and receiver light barrier OBE20M-R100-#281004"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.