Fan 31W, 101cbm/h, IPX5 - Ventilator for in-house bathrooms ER 100

Fan 31W, 101cbm/h, IPX5 - Ventilator for in-house bathrooms ER 100 – Maico – 0084.0130 – 4012799841302: Fan 31W, 101cbm/h, IPX5 ER 100 nominal width 75mm, volume flow 101m³/h, color white, medium temperature -20... 40°C, type of installation flush-mounted, rated voltage 230V, mains frequency 50Hz, composition standard, nominal current 0.14A, speed 19001 /min, housing material plastic, axial direction, degree of protection (IP) other, width 250mm, height 250mm, depth 150mm, version with time delay switch: switch-on delay approx. 50 sec. Run-on time approx. 6 minutes. Speed cannot be controlled. Fan with cover and G2 filter for installation in flush-mounted housing. For one-room or two-room ventilation with a single fan (exception: version H and GVZC EC). Electrical plug-in connection for quick assembly of the fan in the housing. Easy filter change without tools. Cover can be rotated by +- 5°, allowing compensation if the housing is inserted at an angle. Installation-friendly snap-on fastening of the fan in the housing. Color traffic white, similar to RAL 9016. All MAICO ER devices correspond to protection class IP X5 and can therefore be installed in area 1 according to DIN VDE 0100-701, even with water jets. See planning information for details. Protection class II. The extremely steep curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. ER 60 GVZC EC: with energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volumetric flow characteristic and leakage air rate tested by TÜV Bayern eV Leakage air volume flow < 0.01 m3/h. Shaft level difference according to DIN 4109, tested by IAB Oberursel. With VDE mark.Item: ER 100 VZ, design: time delay switch, delivery volume: 101 m3/h, speed: 1900 rpm, air direction: ventilation, speed controllable: no, SEC average: -6.5 kWh/(m2 a) , type of voltage: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 29.5 W, IMax: 0.14 A, degree of protection: IP X5, mains cable: 5 / 1.5 mm2 location: wall / ceiling, type of installation: Flush-mounted, system type: decentralized, material: plastic, colour: traffic white, similar to RAL 9016, weight: 1.5 kg, filter class: G2, air discharge direction: to the side, width: 250 mm, height: 250 mm, depth: 150 mm, conveying medium temperature at IMax: 40 °C, run-on time: 6 min, switch-on delay: 50 s, sound pressure level: 45 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm