X05V-K 1x0.75 BUWH - Power cable < 1kV, fix installation 4512262S S250

Lappkabel - 4512262S S250 - X05V-K 1x0.75 BUWH - Power cable < 1kV, fix installation 4512262S S250
Photo source: fig. possibly similar
4512262S S250 4512262S/250 4044774700618 EAN/GTIN DE 14831145 WEEE

$75.04 excl. VAT
(For 250 Metre) plus shipping bulky item

4-5 days* (USA)

x 250 Metre
Add to wish list
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
X05V-K 1x0.75 BUWH 4512262S S250 conductor material copper, conductor nominal cross-section... more
X05V-K 1x0.75 BUWH - Power cable < 1kV, fix installation 4512262S S250 – Lappkabel – 4512262S/250 – 4044774700618: X05V-K 1x0.75 BUWH 4512262S S250 conductor material copper, conductor nominal cross-section 0.75mm², AWG size 20, conductor diameter 0.98mm, conductor class class 5 = finely stranded, number of cores 1, core insulation material Polyvinyl chloride (PVC), core color different, fire behavior class according to EN 13501-6 Eca, flame-retardant according to EN 60332-1-2, outer diameter approx. 2.5mm, max. Outside cable temperature during assembly/handling 5 ... 70°C, perm. External cable temperature after assembly without vibration -40 ... 80°C, nominal voltage U0 300V, nominal voltage U 500V, internal wiring of devices, protected laying in and on lights, signal systems on and under plaster in tubes, fine-wire copper conductor made of bare copper wires according to stranded conductor class 5 according to IEC 60228/ VDE 0295, core insulation based on PVC, marked with colored helix, based on EN 50525-2-31, flame-retardant according to IEC 60332-1-2, coil: d1=18mm, d2=200mm, b=85mm
... more
Conductor material Copper
Conductor surface bright
Conductor cross-section 0.75 mm²
AWG size 20
Conductor diameter 0.98 mm
Conductor category Cl.5 = finely stranded
Number of cores 1
Core insulation material Polyvinyl chloride (PVC)
Core identification Color
Core color various
With protective conductor no
Permitted max. conductor temperature 70 °C
Umbrella no
Drain wire no
Cover without
Armouring / reinforcement without
jacket material without
Fire behavior class according to EN 13501-6 Eca
Halogen-free according to EN 60754-1 / 2 no
Flame retardant according to IEC / EN 60332-1-2
Low smoke according to EN 61034-2 no
Cold-resistant to EN 60811-504 + 505 + 506 no
Oil resistant to EN 60811-404 no
Outer diameter approx. 2.5 mm
Rated voltage U0 300V
Rated voltage U 500V
Mass 9 kg/km

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "X05V-K 1x0.75 BUWH - Power cable < 1kV, fix installation 4512262S S250"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.