Relay station 8-fold universal - Installation relay 24VDC RS 8 REGHE

Relay station 8-fold universal - Installation relay 24VDC RS 8 REGHE – Jung – 4011377036345: Relay station 8-fold universal RS 8 REGHE function partially electronic, mounting type DIN rail, width in division units 8, number of contacts as normally open contacts 8, control voltage 1 24 ... 24V, control voltage type 1 DC, control voltage 2 24 ... 24V, control voltage type 2 DC, rated current 16A, supply voltage 230 ... 240V, voltage type of supply voltage AC, Max. incandescent lamp load 3000W, Max. fluorescent lamp load 1000VA, Max. fluorescent lamp load (duo circuit) 2300VA, Max. fluorescent lamp load (parallel compensated) 1160VA, Max. switching current ( cos phi = 0.6) 16A, universal relay station, 8-fold, REG, with integrated bus coupler, mains supply: AC 230/240 V ~, 50/60 Hz, power consumption: typically 9 W (all relays switched on), maximum 12.5 W (all outputs fully loaded) and standby 0.5 W, connection for mains supply and load outputs A: screw terminals, 0.5 mm² to 4 mm² (solid), 0.35 mm² to 4 mm² (fine-wire without ferrule) and 0.14 mm² to 2.5 mm² (fine-stranded with ferrule), connection for switching inputs E, control outputs A and control points: screw terminals, 1.5 mm² (solid), 1 mm² (fine-stranded without ferrule) and 0.75 mm² (fine-stranded with ferrule), load outputs (A1 to A8): Contact type: NO contact (potential-free, µ contact), switching voltage per load output: AC 250 V ~, switching capacity: 16 AX, current carrying capacity: all load outputs together 80 A, adjacent load outputs together 20 A, inrush current: maximum 800 A (200 µs) and maximum 165 A (20 ms), switching capacity per load output: ohmic load 3000 W, capacitive load: 16 A, maximum 140 µF, motor: 1380 VA (blind or fan), lamp loads: incandescent lamps 3000 W, 230- V halogen lamps 2500 W, LV halogen lamps 1500 W (Tronic transformer) and 1200 W (inductive transformer), fluorescent lamps 1000 W (uncompensated, 140 µF), 1160 W (parallel compensated, maximum 140 µF) and 2300 W (duo circuit ) and ECG type-dependent, minimum load: AC 12 V, 100 mA, switching inputs (E1 to E8): internal resistance Ri: 200 kOhm, control voltage: DC 24 V SELV, control outputs (A1` to A8`): resistance Ra: 330 Ohm, control voltage : DC 24 V SELV, current carrying capacity: 10 mA, operating points: Voltage: DC 24 V SELV, current carrying capacity: together 80 A, length of the control line: maximum 100 m, switch or button operating mode selectable, feedback LEDs, number of operating points: capacitive pushbutton sensors 4 and mechanical pushbutton sensors depending on pushbutton sensor, ambient temperature: - 5 °C to + 45 °C, storage temperature: - 25 °C to + 70 °C, width: 144 mm (8 HP), with electronic hand control and LED status display, to be operated with AC/DC 24 V pushbutton sensor or mechanical button, for switching and pressing electrical consumers AC 230/240 V with potential-free contacts and switching electrically operated blinds, roller shutters, awnings and other curtains