Radio universal dimmer, 4 channels, REG - Dimmer modular distributor FM UD 420250 REG
FM UD 420250 REG
4011377087545
EAN/GTIN
DE 64244154
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Radio universal dimmer 4-channel, REG FM UD 420250 REG combination base element with complete...
more
Radio universal dimmer, 4 channels, REG - Dimmer modular distributor FM UD 420250 REG – Jung – 4011377087545: Radio universal dimmer 4-channel, REG FM UD 420250 REG combination base element with complete housing, radio operating mode, phase control dimming, phase control dimming, load type universal, light value memory, mounting type REG, mounting type other, material plastic, halogen-free, nominal voltage 230 ... 230V, frequency 50 ... 60Hz, connection type screw terminal, wire cross section 0.5 ... 4mm², device width 144mm, REG housing 8 HP new system function: fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Intended use Switching and dimming of light bulbs, HV -Halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps Operation with power supply 12 V REG (item no. NT 1220 REG VDC) and eNet radio -Receiver module REG (item no. FM FK 32 REG) or eNet server Operation with suitable eNet radio transmitters Mounting on top-hat rail according to DIN EN 60715 in sub-distributor Product features Switching on using lamp-friendly soft start Switch-on brightness can be permanently saved for each output Minimum brightness can be saved permanently for each output Scene operation possible Status display of the outputs via LED Status feedback to radio transmitter Outputs can be switched with the Prog button Increase in output power possible by connecting several outputs in parallel Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest Electronic over-temperature protection Automatic or manual setting of the dimming principle that suits the load Power expansion through power additives (Art.- No. ULZ 1755 REG) possible Optional accessories: Compensation module LED, item no.: KM LED 230 U Adjustable with eNet server: Maximum brightness Dimming speed On/off delay Dimming up/down ramp Switch-off warning Control locks Permanent on, permanent off Hotel function Follow-up time Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Update of the device software Read out error memory Nominal voltage: AC 230 V ~, 50/60 Hz Power loss: max. 8 W Standby power: max. 1.2 W Ambient temperature: -5 ... +45 °C connected load per output at 45 °C performance information including transformer power loss. Operate inductive transformers with at least 85% nominal load. With ohmic-inductive mixed load, max. 50% share of ohmic load. Otherwise the dimmer may be incorrectly calibrated. Load outputs connected in parallel should only be utilized up to 95%. The minimum load when connecting load outputs in parallel is 250 VA. Incandescent lamps: 20 ... 250 W HV halogen lamps: 20 ... 250 W Electronic transformers: 20 ... 250 W Electronic transformers with LV LED: typ. 20 ... 100 W Inductive transformers: 20 ... 250 VA inductive transformers with LV LED: typ. 20 ... 100 VA HV LED lamps dimmable: typ. 3 ... 50 W Compact fluorescent lamps dimmable: typ. 3 ... 50 W With the setting ''LED trailing edge'' ' the maximum connected load for HV LED lamps and electronic transformers with LV LED doubles. Ohmic-inductive: 20 ... 250 VA Ohmic-capacitive: 20 ... 250 VA Capacitive-inductive: not permitted Additional power: see instructions for additional power Connection Outputs Connection type: Screw terminals solid: 1 x 1.5 ... 4 mm2 fine-wire without Ferrule: 1 x 0.75 ... 4 mm2 fine-stranded with ferrule: 1 x 0.5 ... 2.5 mm2 Contact type: e Length of load cable per channel: max. 100 m Installation width: 144 mm (8 HP) Bus cable nominal voltage : DC 12 V SELV Current consumption: 10 mA Bus connection: Connection terminal Cable length: max. 3 m
...
more
Compilation | Base element with complete housing |
Of operation | Radio |
Dimming Phase control | yes |
Dimming Phase section | yes |
Series dimmer | no |
Load type | universal |
Light value memory | yes |
Suitable with button | no |
Usable with motion detector | no |
Suitable with presence detector | no |
Usable with timer / timer | no |
Mounting | REG |
Mounting | other |
Material | Plastic |
Halogen free | yes |
Nominal voltage | 230V |
Frequency | 50..60 Hz |
Connection | Screw terminal |
Core cross-section | 0.5..4 mm² |
Device width | 144 mm |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking