Sensor, magnetic, cylinder 9.2x16.5x20, 24VDC - Magnet safety proximity switch MZA70175

Ipf Electronic - MZA70175 - Sensor, magnetic, cylinder 9.2x16.5x20, 24VDC - Magnet safety proximity switch MZA70175
Photo source: fig. possibly similar
MZA70175 DE 40951076 WEEE

Our best price
$50.67 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Magnet safety proximity switch, Magnet safety proximity switch Number of semiconductor outputs... more
Sensor, magnetic, cylinder 9.2x16.5x20, 24VDC - Magnet safety proximity switch MZA70175 – Ipf Electronic: Magnet safety proximity switch, Magnet safety proximity switch Number of semiconductor outputs with signalling function 1, Number of contact energized outputs with signalling function 0, Number of protected semiconductor outputs 0, Number of protected contact energized outputs 0, Type of actuation Magnet, Type of electric connection Connector M8, Type of switching output PNP, Width sensor 9,2mm, Height of sensor 16,5mm, Length of sensor 20mm, Explosion safety category for gas None, Explosion safety category for dust None, Construction type housing Cuboid, Material housing Other, SIL according to IEC 61508 None, Max. output current at protected output 150mA, Ambient temperature -25 ... 75°C, Rated supply voltage at DC 10 ... 30V, Voltage type DC, Cross-/short circuit identification possible, Degree of protection (IP) IP67
... more
Type of operation Magnet
Execution of the switching output PNP
Width of the sensor 9.2 mm
Height of the sensor 16.5 mm
Length of the sensor 20 mm
Explosion protection category for gas without
Explosion protection category for dust without
Housing construction Cuboid
Material of the housing other
SIL according to IEC 61508 without
Max. Output current at the safe output 150 mA
Ambient temperature -25..75 °C
Rated supply voltage at DC 10..30 V
Voltage DC
Cross / short circuit detection possible no
Suitable for safety functions no
IP protection) IP67

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Sensor, magnetic, cylinder 9.2x16.5x20, 24VDC - Magnet safety proximity switch MZA70175"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.