Surface-mounted distributor volta 4-row.f.Multimedia - Surface mounted distribution board 640mm V...

Surface-mounted distributor volta 4-row.f.Multimedia - Surface mounted distribution board 640mm V... – Hager – 3250616411586: Surface-mounted distributor volta 4-reih.f.Multimedia VA48WWH Type of surface-mounted installation, number of rows 4, width in modular units 12, type of cover door, design cover with cutout, material of the housing other, height 640mm, width 305mm, depth 96.5mm, installation depth 96.5 mm, interior depth 92.5 mm, DIN rail, with mounting plate, attachment option, color white, RAL number 9010, degree of protection (IP) IP30, type of locking other, multimedia Volta surface-mounted distributor, 4 rows, with slotted plastic door. Installation small distributor made of plastic, according to DIN VDE 60670-24 and DIN 43871, suitable for use in residential buildings according to DIN 18015 and for the installation of protectively insulated VDI components. Degree of protection IP30, protection class II, protective insulation. Consisting of: plastic base plate with cable clamp as standard, ventilation door made of sheet steel with slotted plastic insert for a better WLAN signal, powder-coated and burned-in and flush with the inside, manually operated hinges. Door lock with front-flush recessed grip and handle that folds back automatically, door hinge on the right or left. Upper connection space: patch panel and DIN rail snapped on to accommodate different communication modules, for the required functional equipotential bonding according to DIN EN 50310 (VDE 0800-2-310) there are 2 screw fastenings on the patch panel. Labeling option with enclosed labeling strips for port labelling. Pre-assembled, perforated mounting plates made of galvanized sheet steel with 3.2 mm perforations are installed. A universal mounting bracket can be hung directly on the perforated plate for screwless attachment of VDI components. A 3-way protective contact socket (rotatable by 90°) is installed in the lower connection space. The sockets can be connected directly via a connection terminal. The sockets can be equipped with an enclosed protective contact cover to comply with protection class II. The triple protective contact socket can also be mounted in two positions on a DIN rail. Note: A type 3 surge protection module can be connected directly (not included).