HW small distributor, Volta 4-row - Hollow wall mounted distribution board VH48NW

HW small distributor, Volta 4-row - Hollow wall mounted distribution board VH48NW – Hager – 3250616480254: HW small distribution board, Volta 4-row VH48NW Type of installation hollow wall, number of rows 4, width in module widths 12, type of cover door, design cover with cutout, material of the housing other, height 755.5mm, width 348mm, depth 94.5mm, Installation depth 90mm, interior depth 91.5mm, DIN rail, with mounting plate, add-on option, color white, RAL number 9010, degree of protection (IP) IP30, type of locking other, multimedia, volta, HWV, 4 rows, with slotted sheet steel door. Installation small distribution boards made of plastic, according to DIN VDE 61439-3, suitable for use in residential buildings according to DIN 18015 and for the installation of protectively insulated VDI components. Degree of protection IP30, protection class II, protective insulation. Consisting of: Plastic wall box with cable clamp as standard, break-out cable entry slide with snap-on fastening and integrated spirit level. Cavity wall attachment with quick-release lever, can be mounted on the side or above/below. Rotatable blind frame with ventilation door made of sheet steel, powder-coated and stoved, with 15 mm plaster compensation. Ventilation door, front-flush with internal, manually operated hinges. Door lock with front-flush recessed grip and handle that folds back automatically, door hinge on the right or left without removing the frame. Upper connection space: patch panel and DIN rail snapped on to accommodate different communication modules, for the required functional equipotential bonding according to DIN EN 50310 (VDE 0800-2-310) there are 2 screw fastenings on the patch panel. Labeling option with enclosed labeling strips for port labelling. Pre-assembled, perforated mounting plates made of galvanized sheet steel with 3.2 mm perforation are installed. A universal mounting bracket can be hung directly on the perforated plate for screwless attachment of VDI components. A 3-way protective contact socket (rotatable by 90°) is installed in the lower connection space. The sockets can be equipped with an enclosed protective contact cover to comply with protection class II. Note: A type 3 surge protection module can be connected directly (not included).