Energy meter 3-phase for converter 1A or 5A, S0 - Transformer kilowatt-hour meter 5A ECP300C

Energy meter 3-phase for converter 1A or 5A, S0 - Transformer kilowatt-hour meter 5A ECP300C – Hager – 3250612231393: 3-phase energy meter for converter 1A or 5A, S0 ECP300C Electronic meter type, rated current (In) 5A, maximum current (Imax) 6A, rated voltage (Un) NL 92 ... 276V, rated voltage (Un) LL 160 ... 480V, frequency 45 ... 65Hz, accuracy class B, Polart four-wire, measuring transformer version, energy type active and reactive power, suitable for import/delivery, two-tariff tariff design, external tariff control, backstop, calibrated, Measuring Instruments Directive approval, electrical pulse output, pulse type S0, pulse rate 1 ... 10000Imp/kWh (kvarh), display type digital, mounting type REG, width in modular units 4, version of the interface without, number of digits 9, degree of protection (IP) IP20, 3-phase energy meter for converter ratio 1A or 5A, S0, MID. Energy meter for 4-quadrant measurement with the following accuracy classes: active energy class B according to DIN EN 50470-3, active power class 1 according to IEC 62053-21, active power class 1 according to IEC 61557-12 and reactive power class 2 according to IEC 62053-23. The bidirectional counter is MID certified ex works (a sealing set included in the scope of delivery) and contains a resettable partial counter. Suitable for measuring energy procurement and energy delivery in all network systems. 2 tariff counts can be controlled via 230 V AC and output can be configured via 2 pulse outputs. Digital display with lighting to show the imported and delivered active (kWh) and reactive energy (kvarh) for all tariffs. In addition, the real-time measured values for active power (kW), reactive power (kvar), apparent power (kVA), voltage (V), current (A), power factor, frequency (Hz) and tariff are displayed for each outer conductor with a resolution of up to 9 digits including two decimal places displayed. The measured values for imported and supplied active (kWh) and reactive energy (kvarh) as well as the imported active energy (kWh) for tariff 1 and tariff 2 are output via the pulse output. All measured values and energy values for tariff 1 and tariff 2 can also be output via an IR interface. Wiring errors and connection errors are displayed and the measurement data is saved periodically.