Energy meter 3-phase direct 125A, 6M, MBUS - Direct kilowatt-hour meter 125A ECM310D

Energy meter 3-phase direct 125A, 6M, MBUS - Direct kilowatt-hour meter 125A ECM310D – Hager – 3250612231331: Energy meter 3-phase direct 125A, 6M, MBUS ECM310D Electronic meter type, rated current (In) 125A, maximum current (Imax) 125A, rated voltage (Un) NL 92 ... 276V, rated voltage (Un) LL 160 ... 480V, frequency 45 .. 65Hz, accuracy class B, Polart three-wire/four-wire, direct measurement version, active and reactive power energy type, suitable for import/delivery, multi-tariff tariff design, internal/external tariff control, backstop, calibrated, Measuring Instruments Directive approval, optical pulse output, digital display type, mounting type REG, width in pitch units 6, design of the M-Bus interface, number of digits 9, degree of protection (IP) IP20, energy meter 3-phase, direct 125A, 6M, MBUS, MID. Energy meter for 4-quadrant measurement with the following accuracy classes: active energy class B according to DIN EN 50470-3, active power class 1 according to IEC 62053-21, active power class 1 according to IEC 61557-12 and reactive power class 2 according to IEC 62053-23. The bidirectional counter is MID certified ex works (a sealing set included in the scope of delivery) and contains a resettable partial counter. Suitable for measuring energy procurement and energy delivery in all network systems. 2 tariff counts can be controlled via 230 V AC or Mbus. Digital display with lighting to show the imported and delivered active (kWh) and reactive energy (kvarh) for all tariffs. In addition, the real-time measured values for active power (kW), reactive power (kvar), apparent power (kVA), voltage (V), current (A), power factor, frequency (Hz) and tariff are displayed for each outer conductor with a resolution of up to 9 digits including two decimal places displayed. In addition to the measured values mentioned above, the current total measured values of active power (kW), reactive power (kvar) and apparent power (kVA) can be accessed via Mbus. All measured values and energy values for tariff 1 and tariff 2 can also be output via an IR interface. Wiring errors and connection errors are displayed and the measurement data is saved periodically.