Uni-LED dimming insert comfort - Dimmer flush mounted 540100

Uni-LED dimming insert comfort - Dimmer flush mounted 540100 – Gira – 4010337048268: Uni-LED dimming insert comfort 540100 Composition of basic element, operating type pushbutton, dimming leading edge, dimming trailing edge, universal load type and LED retrofit, extension input, flush-mounting type, fastening type claw/screw fastening, material other, material quality other, surface other, color other, suitable for Degree of protection (IP) IP20, rated voltage 230 ... 230V, frequency 50 ... 60Hz, connection type screw terminal, System 3000 universal LED dimming insert Comfort Features: Switching and dimming incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps. Connection of extensions possible. Automatic or manual setting of the dimming principle suitable for the load (leading edge or trailing edge). Display of the set operating mode via LED. Lamp-saving switching on. Switch-on brightness can be saved permanently. Switching on with the last set brightness or saved switch-on brightness. Minimum brightness adjustable. Electronic short circuit protection. Electronic over-temperature protection. Operation with and without neutral conductor connection. Notes: In principle, the dimmer can be operated without connecting the neutral conductor, but some LED and CFLi light sources require the neutral conductor connection to avoid flickering. When operating without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Gira Tronic transformers and wound transformers increases to 50 W. Electronic transformers and ballasts for LED lamps can be operated using the dimming method specified by the manufacturer. If the ambient temperature is higher than 25 C, the connected load must be reduced.