Wall presence detector 180 degrees MD/PD 180 Slave

Wall presence detector 180 degrees MD/PD 180 Slave – ESYLUX – EM10410024 – 4015120410024: Wall presence detector 180 degrees MD/PD 180 slave version Presence detector, sensor type passive infrared, animal path, scan angle 180°, optimal mounting height 1.1m, stairwell monitoring, max. range to one side 8m, max. presence area 6.29m², max. range frontal 3m, Detection field diameter on floor 16m, with signal unit, suitable for wall mounting, flush-mounted installation, connection type plug-in terminal, material plastic, material quality thermoplastic, halogen-free, surface untreated, surface design matt, color other, transparent, protection class (IP) IP20, voltage type AC, nominal voltage 230V, min. duty cycle 0s, max. duty cycle 0min, switch-off delay 0s, switch-on delay 0s, horizontal detection angle 0 ... 180°, sensor swivel range, horizontal 0°, sensor swivel range, vertical 0°, temperature 0 ... 50°C, Number of switching zones 0, width 70mm, height 29mm, depth 70mm, installation width 61mm, installation depth 34mm, installation length 61mm, installation diameter 60mm, min. depth the device box 34mm, slave detector for expanding the detection area of a master detector with 180° detection area for wall mounting. Range of up to 16 m for cost-effective system expansion with up to 6 additional extensions. All parameters are set on the master detector, the slave detector detects movements and forwards them to the master. Cover frame IP 20 in 5 different colors. Brand switch compatible, thus replacing any conventional switch. Design in IP 44, suitable for damp rooms, garages, basement exits. Anti-vandal cover with stainless steel screws (accessories). Prevention of unwanted switching, e.g. B. by small animals, by hiding the vertical detection area using the enclosed cover cap. Universal surface-mounted box IP 20/IP 44 with triple membrane cable entry. The slave detector can be connected to the following detectors: PD 180i/R, MD 180i/R.