Emergency light 30m EKW 4W - Emergency luminaire 4W IP54 3...8h SLE/SLFEL#EN10061820

Emergency light 30m EKW 4W - Emergency luminaire 4W IP54 3...8h SLE/SLFEL#EN10061820 – ESYLUX – EN10061820 – 4015120061820: Emergency light 30m EKW 4W SLE/SLFELEN10061820 Type of installation Wall mounting, Escape route marking function, Suitable for marking type insert sheet/plate, Type of marking only on one side, With pictogram, Automatic self-test monitoring device, Switching type maintained/standby mode, With remote switch connection, Decentralized feed (individual battery), Battery quality NiMh, illuminant LED not interchangeable, with illuminant, suitable for number of illuminants 1, other socket, number of lamp heads 1, housing material plastic, housing color white, cover material transparent plastic, type of voltage AC, nominal voltage 230 ... 230V, operating device LED -Control gear, other light distributor, energy efficiency class of the built-in lamp A++, A+, A (LED), degree of protection (IP) IP54, protection class II, rated ambient temperature according to IEC62722-2-1 5 ... 35°C, max. system power 4W, Rated luminous flux according to IEC 62722-2-1 65lm, Color temperature 4000 ... 4000K, viewing distance 30m, nominal operating time 3 ... 3h, width 75mm, height/depth 184mm, length 306mm, type of wiring suitable for through-wiring, number of positions 7, conductor cross-section 1.5mm², connection type plug-in connection, self-contained emergency light with 3 h / 8 h emergency light duration and 30 m detection range for wall mounting with self-monitoring (SC) and fail-safe contact (opens in the event of an error). 3 h mode uses the pictogram lighting and downlight function / 8 h mode uses the pictogram lighting in emergency mode. Additional remote switch connection (F+, F-) to deactivate the emergency lighting function when the building is not in use. Function check and self-monitoring can be triggered conventionally with a test button or conveniently with the Mobil-SLi remote control, constant charge monitoring, automatic, weekly function test and annual operating time test, test results are displayed by colored LEDs (green/red). Maintained and stand-by mode. Additional light emission downwards. Including NiMh battery with reverse polarity protected plug connection. Connection by means of plug-in terminals. Cable entry optionally from behind or above (self-sealing membrane). ABS housing.