Emergency light 24m EKW 4W - Emergency luminaire 4W IP54 3...8h SLE/SLFEL#EN10061806

Emergency light 24m EKW 4W - Emergency luminaire 4W IP54 3...8h SLE/SLFEL#EN10061806 – ESYLUX – EN10061806 – 4015120061806: Emergency light 24m EKW 4W SLE/SLFELEN10061806 Mounting type Wall mounting, Escape route marking function, Suitable for labeling type insert sheet/plate, Type of labeling only on one side, With pictogram, Automatic self-test monitoring device, Switching type maintained/standby mode, With remote switch connection, Decentralized feed (individual battery), Battery quality NiMh, illuminant LED not interchangeable, with illuminant, suitable for number of illuminants 1, other socket, number of lamp heads 1, housing material plastic, housing color white, cover material transparent plastic, type of voltage AC, nominal voltage 230... 230V, operating device LED - Current-controlled control gear, other light distributor, energy efficiency class of the permanently installed lamp A++, A+, A (LED), degree of protection (IP) IP54, protection class II, rated ambient temperature according to IEC62722-2-1 5... 35°C, max. system power 4W, Rated luminous flux according to IEC 62722-2-1 65lm, Fa temperature 5000... 5000K, viewing distance 24m, nominal operating time 3... 3h, width 70mm, height/depth 147mm, length 245mm, type of wiring suitable for through-wiring, number of positions 7, conductor cross-section 1.5mm², connection type plug-in connection, self-contained emergency light with 3 h / 8 h emergency light duration and 24 m detection range for wall mounting with self-monitoring (SC) and fail-safe contact (opens in the event of an error). 3 h mode uses pictogram lighting and downlight function / 8 h mode uses pictogram lighting in emergency mode. Additional remote switch connection (F+, F-) to deactivate the emergency lighting function when the building is not in use. Function check and self-monitoring can be triggered conventionally with a test button or conveniently with the Mobil-SLi remote control, constant charge monitoring, automatic, weekly function test and annual operating time test, test results displayed by colored LEDs (green/red). Maintained and stand-by mode. Additional light emission downwards. Including NiMh battery with reverse polarity protected plug connection. Connection by means of plug-in terminals. Cable entry optionally from behind or above (self-sealing membrane). ABS housing.