Door station video 2/1 2D stainless steel ONE - Push button panel door communication REQ502Y

Door station video 2/1 2D stainless steel ONE - Push button panel door communication REQ502Y – Elcom – 3599430011658: Door station video 2/1 2D stainless steel ONE REQ502Y Number of bell buttons 2, material of the bell buttons plastic, surface-mounting type, installation technology bus system, color silver, door station video 2/1 2-wire stainless steel matt ONE. Video outdoor station for intercom according to DIN EN 50486 in 2-wire technology. Front-door station for installation in separately available flush-mounted or surface-mounted housing, consisting of a 2 mm thick front panel made of brushed stainless steel with speech and camera opening, color camera with scratch-resistant cover, screwless fastening for housing (surface/flush-mounted) with snap-in spring mechanism and opening mechanism Protection against vandalism, flush name plate(s) (can be changed from the front) with call button(s) including white LED backlighting and plug-in connection terminal block with screw terminals. Pre-wired front panel with electronic components in encapsulated monoblock construction with speaker, microphone and camera. Device configuration via rear LED display with 3 soft keys and 7-segment display, display mode can be rotated 180 degrees for optimum readability and operability, as well as automatic addressing when power is switched on for the first time. Switching on of the key illumination dependent on ambient light, adaptable to ambient conditions via brightness sensor. Functions: camera can be set and locked horizontally and vertically from the front, switching on of an integrated IR light dependent on the ambient light to support the camera function in the dark, integrated camera heating to prevent condensation and frost on the camera sphere. Integrated door release contact, call button with adjustable light/door release/relay function. Adjustable volume, microphone sensitivity, door release function and call button backlighting. Call button with acknowledgment tone (can be switched off) and tactile feedback. Loudspeaker and microphone protected against tampering. One-man commissioning via LED display configuration.