Safety relay delayed 24VDC - Safety relay 0...26,39999999V DC ESR5-NV3-30

Safety relay delayed 24VDC - Safety relay 0...26,39999999V DC ESR5-NV3-30 – Eaton – 118705 – 4015081168453: Safety relay delayed 24VDC ESR5-NV3-30 Basic device version, Suitable for monitoring position switches, Suitable for monitoring EMERGENCY STOP circuits, Suitable for monitoring optoelectronic protective devices, Design of the electrical connection Screw connection, DIN rail mounting possible, Rated control supply voltage Us at AC 50 Hz 0 ... 26.4V, Rated control supply voltage Us at AC 60 Hz 0V, Rated control supply voltage Us at DC 0V, Type of voltage for actuation DC, With removable terminals, Evaluation of the inputs with one and two channels, With start input, With feedback circuit, OFF-delay 0.1 .. 30s Number of outputs, safety-related, instantaneous, with contacts 2 Number of outputs, safety-related, delayed, with contacts 2 Number of outputs, safety-related, instantaneous, semiconductor 0 Number of outputs, safety-related, delayed, semiconductor 0, Number of outputs , signaling function, instantaneous, contact-based 0, number of outputs, signaling function, delayed, contact-based 0, number of outputs, signaling function, undelayed, semiconductor 0, number of outputs, signaling function, delayed, semiconductor 0, category according to EN 954-1 4, safety type according to IEC 61496-1 without , stop category according to IEC 60204 1, performance level according to EN ISO 13849-1 level e, SIL according to IEC 61508 3, with TÜV approval, with approval according to UL, width 22.5mm, height 99mm, depth 114.5mm, safety relay off-delayed, for implementing the basic functions emergency stop / emergency stop / protective door / light grid, one or two-channel operation, supply voltage 24VDC, 2 enabling current paths (IEC/EN 60204 stop category 0), suitable for safety position switches with guard locking LS-S.. .MT-ZBZ 2 enabling current paths (IEC/EN 60204 stop category 1), 1 signaling current path, protection against accidental contact according to EN 50274 finger- and back-of-hand-safe when operated vertically from the front, suitable for Cat. 4 according to EN 954-1 / PL e according to EN ISO 13849-1 / SILCL3 according to IEC 6206 1 / SIL3 only for high-demand requirements