Position switch dome plunger LS-20

Position switch dome plunger LS-20 – Eaton – 266120 – 4015082661205: Position switch dome plunger LS-20 sensor width 31mm, sensor diameter 0mm, sensor height 61mm, sensor length 33.5mm, rated operational current Ie at AC-15, 24 V 6A, rated operational current Ie at AC-15, 125 V 6A, rated operational current Ie at AC-15, 230 V 6A, rated operational current Ie at DC-13, 24 V 3A, rated operational current Ie at DC-13, 125 V 0.8A, rated operational current Ie at DC-13, 230 V 0.3A, switching function slow-action contact element, Number of safety-related auxiliary contacts 0, number of contacts as NC contacts 0, number of contacts as NO contacts 2, number of contacts as changeover contacts 0, design of the interface without, design of the interface for safety-related communication without, cuboid housing design, housing material plastic, housing coating other, design of the actuating element rounded plunger, alignment of the actuating element other, design of the electrical connection other, suitable for safety function en, Explosion protection category for gas without, Explosion protection category for dust without, Ambient temperature during operation 25... 70°C, degree of protection (IP) IP67, degree of protection (NEMA) 4X, position switch, basic function: position switch, type identifier: LS( M) Range: rounded plunger, degree of protection: IP66, IP67, equipment: basic device, expandable, ambient temperature: -25 - +70 °C, contact assembly S = NO contact: 2 NO, color of housing cover: yellow, housing: plastic, connection type: cage clamp , Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden. Accessories for the Cage-Clamp connection from Wago: insertion bridge, grey, Wago order no. 264-402, standards and regulations: IEC/EN 60947