Surge arrester DEHNguard - Surge protection for power supply DG M TT 2P 275

DG M TT 2P 275 952110 4013364108417 EAN/GTIN DE 11890845 WEEE

Our best price
$100.52 excl. VAT
$223.97 (-55.12% RRP***)

4-5 days* (USA)

This is a new item from a return in perfect condition. The original packaging has been opened for product testing purposes, any existing seal may be broken. The full legal warranty and the full right of return apply.

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
ÜS arrester DEHNguard DG M TT 2P 275 TN network type, TT network type, number of conductors... more
Surge arrester DEHNguard - Surge protection for power supply DG M TT 2P 275 – Dehn – 952110 – 4013364108417: ÜS arrester DEHNguard DG M TT 2P 275 TN network type, TT network type, number of conductors (without earth) 2, rated discharge current (8/20) 20kA, rated voltage AC 230V, short-circuit strength (Isccr) 50kA, maximum continuous voltage AC 275V, max. discharge current (8/20) 40kA, mounting type DIN rail TH35, size 2 TE, max. conductor cross-section rigid (single/stranded) 35mm², max. conductor cross-section flexible (finely stranded) 25mm², protection level LN 1.5kV, protection level N-PE 1.5kV, Optical signaling on the device, test class type 2, degree of protection (IP) IP20, multi-pole surge arrester DEHNguard M, type 2 according to EN 61643-11, consisting of a base part and plugged-in protection modules. High level of device safety thanks to arrester monitoring with thermal dynamic control. To protect low-voltage consumer systems against overvoltages. For use in the lightning protection zone concept at the interfaces 0B - 1 and higher.
... more
Network form DC no
Network form IT no
Network shape TN yes
Mains form TN-C no
Mains form TN-CS no
Mains form TN-S no
Network shape TT yes
Network form other no
Number of conductors (without earth) 2
Nominal discharge current (8/20) 20 kA
Max. Surge current (8/20) 40 kA
Rated voltage AC 230V
Highest continuous voltage AC 275 V
Protection level LN 1.5 kV
Protection level N-PE 1.5 kV
Short-circuit resistance (Isccr) 50 kA
Integrated short-circuit protection no
Integrated backup fuse no
Free from leakage current no
Mounting DIN rail TH35
Size 2 TE
With telecommunication contact no
Signaling on the device optical
Test class type 2 yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge arrester DEHNguard - Surge protection for power supply DG M TT 2P 275"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.