Modular combination arrester for 2 single wires - Combined arrester for signal systems BCO ML2 BE 12

BCO ML2 BE 12 927222 4013364405592 EAN/GTIN DE 11890845 WEEE

Our best price
$95.12 excl. VAT
$180.16 (-47.2% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combined arrester for signal systems, Combined arrester for signal systems Nominal voltage DC 12... more
Modular combination arrester for 2 single wires - Combined arrester for signal systems BCO ML2 BE 12 – Dehn – 927222 – 4013364405592: Combined arrester for signal systems, Combined arrester for signal systems Nominal voltage DC 12 ... 12V, Max. continuous voltage AC 10,6V, Max. continuous voltage DC 15V, Lightning impulse current (10/350 µs) 3kA, Nominal discharge surge current (8/20) 10kA, Nominal load current 0,75A, Voltage protection level core/core 48V, Voltage protection level core/earth 45V, Limiting frequency 1,4MHz, Mounting method DIN rail (top hat rail) 35 mm, Connection 1 Clamp, Pro-active thermo-control
... more
Rated voltage DC 12V
Highest continuous voltage AC 10.6 V
Highest continuous voltage DC 15 V
Lightning impulse current (10/350 µs) 3 kA
Nominal discharge current (8/20) 10 kA
Nominal load current 0.75 A
Protection level wire / core 48V
Protection level core / earth 45 V
Cut-off frequency 1.4 MHz
Mounting DIN rail TH35
Connection 1 Push-in terminal
SPD yes
With telecommunication contact no
Explosion-tested version no
Separation option for signal circuit yes
Number of conductors (without earth) 2
Earthing via DIN rail
Overall width 6 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Modular combination arrester for 2 single wires - Combined arrester for signal systems BCO ML2 BE 12"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.