LED flush mounting kit for W 270 and W 276 - LED-module 1,5...3W 4,8V white 40071352024

LED flush mounting kit for W 270 and W 276 - LED-module 1,5...3W 4,8V white 40071352024 – Ceag – 4012539330325: LED upgrade kit for W 270 and W 276 40071352024 Energy efficiency class A+, lamp power 1.5 ... 3W, type of voltage DC, external control gear required, operating voltage 230 ... 230V, lamp voltage 4.8 ... 4.8V, luminous flux 65 . .. 330lm, beam angle 12.4°, number of LEDs 9, shape round, color white, light color according to EN 12464-1 daylight white >5300 K, color temperature 6500K, light intensity 3720cd, connection type other, length 70mm, height 62mm, diameter 115mm, Degree of protection (IP) other, Average rated service life 50000h, conversion kit for upgrading existing bulb hand lamps to LED lighting technology, suitable for lamps of type W 270.3 and W 276.3 with 4 Ah or 7 Ah battery, existing accessories including charging parts can be used continue to be used. Main light consisting of 3 high-power LEDs with narrow-beam reflector technology. Adjustable main light output: Eco mode for extended battery operation (3.0 W) or Boost mode for increased luminous flux (5.5 W). Secondary light with 6 x 3-chip LEDs (1.5 W) and wide beam light distribution. More than 6 times the amount of light compared to the variant with incandescent lamps. Up to 14 hours of light (side light operation) and 5.5 hours at full power with a 4 Ah battery and up to 27.5 hours of light (side light operation) and 9 hours at full power with a 7 Ah battery. Large range of up to 50 m at 1.5 lx illuminance. Lamp power: 3 W Voltage type: DC Lamp voltage: 4.8 V Luminous flux: 240 lm Beam angle: 12.4 ° Number of LEDs: 3 Shape: round