LED recessed ceiling spotlight LB23 UNISIZErimless-round 19W incl. power supply N4911AHN

LED recessed ceiling spotlight LB23 UNISIZErimless-round 19W incl. power supply N4911AHN – bticino – 8005543418086: UP-DOWN” symbol rocker for the Living-Light switch range, 1-module, color: white|Rocker UP/DOWN 1m white||Cover switch-button-dimmer EBN830140||The BYD LVS storage expansion module has a capacity of 4.0 kWh and can be used to expand BYD LVS storage systems. The maximum expansion level is 24.0 kWh (6 battery modules), but can be limited by the hybrid/storage inverter used. Please check the current compatibility overview: https://docs.eft-systems.de/docs|Expansion module for Battery-Box Premium LVS (4.0 kWh)||Safety module EBN830141||The HVM systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVM series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.76 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent memory expansion possible Compatible with many inverter manufacturers The BYD Battery-Box Premium HVM 11.0 consists of 4 HVM Battery modules connected in series. The system can be expanded later by adding additional HVM modules or parallel HVM towers.|Battery-Box Premium HVM 11.0 storage system (11.04 kWh)||Solar battery EBN830142||The HVM systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVM series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.76 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers|Battery-Box Premium HVM 13.8 storage system (13.80 kWh)||Solar battery EBN830143||The HVM systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVM series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.76 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers.|Battery-Box Premium HVM 16.6 storage system (16.56 kWh)||Solar battery EBN830144||The HVM systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVM series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.76 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers.|Battery-Box Premium HVM 19.3 storage system (19.32 kWh)||Solar battery EBN830145||The HVM systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVM series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.76 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers.|Battery-Box Premium HVM 22.1 storage system (22.08 kWh)||Solar battery EBN830146||The HVM systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVM series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.76 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers|Battery-Box Premium HVM 8.3 storage system (8.28 kWh)||Solar battery EBN830147||The HVS systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVS series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.56 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers.The BYD Battery-Box Premium HVS consists of HVS battery modules , which are connected in series. The system can be subsequently expanded by adding additional HVS modules or parallel HVS towers. The direct parallel connection of up to 3 identical BYD Battery-Box Premium HVS also enables a maximum capacity of 38.4 kWh.|Battery-Box Premium HVS 10.2 storage system (10.24 kWh)||Solar battery EBN830148||The HVS systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVS series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.56 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers|Battery-Box Premium HVS 12.8 storage system (12.80 kWh)||Solar battery EBN830149||The HVS systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVS series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.56 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent storage expansion possible Compatible with many inverter manufacturers. The BYD Battery-Box Premium HVS consists of HVS- Battery modules connected in series. The system can be subsequently expanded by adding additional HVS modules or parallel HVS towers. The direct parallel connection of up to 3 identical BYD Battery-Box Premium HVS also enables a maximum capacity of 38.4 kWh.|Battery-Box Premium HVS 5.1 storage system (5.12 kWh)||Solar battery EBN830150||The HVS systems are not compatible with all inverters. You can find an overview of suitable inverters under - further documents. With the Premium HVS series, BYD has brought the next generation of storage systems onto the market. In addition to the well-known advantages of the HV series, some optimizations have been made. The system weight was reduced by almost 30% and the footprint was reduced due to the smaller overall depth. Advantages: Modular plug-in design of the battery modules without complex cabling High flexibility in dimensioning thanks to battery modules with 2.56 kWh capacity Cobalt-free lithium iron phosphate technology Subsequent memory expansion possible Compatible with many inverter manufacturers. This Battery-Box Premium HVS consists of 3 HVS battery modules, which are connected in series to achieve a capacity of 7.7 kWh. The direct parallel connection of up to 3 identical Battery-Box Premium HVS also enables a maximum capacity of 38.4 kWh. The system can be expanded later by adding additional HVS modules or parallel HVS towers.|Battery-Box Premium HVS 7.7 storage system (7.68 kWh)||Solar battery EBN830151||Boom CB 500 2.0kN galvanized|Boom CB 500 2.0kN VZ||Arm for cable carry system EBN830152||Boom CB 600 1.6kN stainless steel|Boom CB 600 1.6kN VZ||Arm for cable carry system EBN830153||Boom, width: 426 mm, to be attached with 2x M8 x 20 mm, sendzimir galvanized|Medium-heavy boom B: 400mm 1500N svz||Arm for cable carry system EBN830154||Fastening set, round-head screw M8 x 20 + washer M8 + nut M8|Fastening set screw set M8||Cup square screw EBN830155||Bend for P31 cable tray, 90 degrees, width 200 mm, height 60 mm, hot-dip galvanized|Bend for P31 cable tray 90° W:200mm H:60mm TVZ||Arc cable tray EBN830156||Bend for P31 cable tray, 90 degrees, width 300 mm, height 60 mm, hot-dip galvanized|Bend for P31 cable tray 90° W:300mm H:60mm TVZ||Arc cable tray EBN830157||Bend for P31 cable tray, 90 degrees, width 400 mm, height 60 mm, hot-dip galvanized|Bend for P31 cable tray 90° W:400mm H:60mm TVZ||Arc cable tray EBN830158||Cable clamp, cable diameter: 12-16 mm, sendzimir galvanized|U-clamp C40 12-16mm SW: 18-22mm||Pipe clamp EBN830159||Cable clamp, cable diameter: 20-24 mm, sendzimir galvanized|U-clamp C40 20 -24mm SW: 18-22mm||Pipe clamp EBN830160||Cable clamp, cable diameter: 36-40 mm, sendzimir galvanized|U-clamp C40 36-40mm SW: 18-22mm||Pipe clamp EBN830161||Articulated coupling H60 svz, screwless: Clamp onto the head end of the ladder and secure by bending the head end of the ladder into the recess 'U'|Joint coupling for cable ladder H60mm svz pair||Connector EBN830162||Retaining spring cover stainless steel, stainless steel sheet, for attaching a cover plate. 1 spring required per meter on each side. The retaining spring is placed with its edge over the cover plate, pulled downwards, and then engages the hook in a hole in the cable ladder side wall.|Retaining spring for gutter cover||Cover clamp EBN830163||Handle U55 1200 7kN 270Nm, hot-dip galvanized|Hanging handle U55 L: 1200mm 7KN 260NM TVZ||Suspended support EBN830164||Cover with snap fastening for P31 cable tray, length 3000 mm, width 300 mm, hot-dip galvanized|Cable tray cover width 300mm hot-dip galvanized||Cover EBN830165||Cover with snap fastening for P31 cable tray, length 3000 mm, width 400 mm, hot-dip galvanized|Cable tray cover width 400mm hot-dip galvanized||Cover EBN830166||Cable clamp, cable diameter: 12-16 mm, hot-dip galvanized|Cable clamp hammer head TVZ 12-16mm SW: 11mm||Pipe clamp EBN830167||Cable clamp, cable diameter: 20-24 mm, hot-dip galvanized|Cable clamp hammer head TVZ 20-24mm SW: 11mm||Pipe clamp EBN830168||Cable clamp, cable diameter: 36-40 mm, hot-dip galvanized|Cable clamp hammer head TVZ 36-40mm SW: 11mm||Pipe clamp EBN830169||Cable clamp, cable diameter: 52-56 mm, hot-dip galvanized|Cable clamp hammer head TVZ 52-56mm SW: 11mm||Pipe clamp EBN830170||Long tray, cable diameter: 20-24 mm, sendzimir galvanized|Long tub for Büglesch. 20-24mm||Fastener profile rail EBN830171||Long tray, cable diameter: 36-40 mm, sendzimir galvanized|Long tub for ironing board. 36-40mm||Fastener profile rail EBN830172||P31 cable tray perforated, length 3000 mm, width 300 mm, height 60 mm, with integrated connector, hot-dip galvanized|P31 cable tray perforated 60x300mm with integrated TVZ connector||Wide span cable tray EBN830173||P31 cable tray perforated, length 3000 mm, width 400 mm, height 60 mm, with integrated connector, hot-dip galvanized|P31 cable tray perforated 60x400mm with integrated TVZ connector||Wide span cable tray EBN830174||Quick coupling, height 60 mm, galvanized|Quick coupling cable ladder screwless H60mm svz||Connector EBN830175||Screw set BTRCC, M6 x 12, electrolytically galvanized|Screw set BTRCC 6x12 EZ SET||Cup square screw EBN830176||+++STEIGEL. H=60 3M 200|Vertical ladder 60x200mm||Vertical ladder EBN830177||Vertical ladder, height: 60 mm, width: 300 mm, length: 3000 mm, galvanized, slot width for the C-profile: 11 mm|Vertical ladder 60x300mm||Vertical ladder EBN830178||+++STEIGEL. H=60 3M 400|Vertical ladder 60x400mm||Vertical ladder EBN830179||P31 Universal attachment, 90 degrees, height 60 mm, sendzimir galvanized|Universal attachment 90° H:60mm SVZ||Angle extension cable tray EBN830180||Universal connector EDU for P31 cable tray without cover, height 60 mm, sendzimir galvanized|Universal connector EDU for P31 without cover H: 60mm SVZ||Connector EBN830181||Universal connector EDU for P31 cable tray without cover, height 60 mm, hot-dip galvanized|Universal connector EDU for P31 without cover H:60mm TVZ||Connector EBN830182||Casting resin CG is an environmentally friendly and removable 2-component cold casting compound based on hydrocarbon resins that does not contain any dangerous raw materials according to CLP Regulation (EC) No. 1272/2008. The translucent casting resin allows visual inspection even after casting. The connection point can be made accessible again at any time by removing the casting resin. Typical areas of application include junction boxes, telecommunications cable connections, etc.|Hydrocarbon resin CG/143ml/Al/K 2 components||Cable resin EBN830183||Small electric water heater, MCX6, 5.7 kW, 230 V, electronically controlled, pressure-resistant design, with effective and maintenance-friendly bare wire heating system IES(R), sensor button and three different colored LEDs to determine the maximum outlet temperature|Instantaneous water heater MCX6 Smartronic 5.7/230||Instantaneous water heater EBN830184||HS-K KNX module, bidirectional gateway for connecting a CLAGE Home Server to the KNX(R) bus system for building automation, IP 20, 90 x 36 x 75 mm (H x W x D).|Gateway HS-K KNX||Hot water tank EBN830185||For wiring in distributors, for voice and signal connections, with PVC core insulation according to DIN VDE 0812 (not approved for high-current installation purposes), switching wire is twisted in pairs, on a plastic spool|YV switching wire 2x0.8/1.4 red/blue roll: 100 m||Power cable < 1 kV, permanent inst. EBN830186||Inductive proximity switch PNP, extremely robust, stainless steel housing (V2A / 1.4305 / AISI 303), M18, PUR cable 2m 3-wire, flush mountable, IP68 / IP69K, indicator LED yellow, IO-Link version 1.1, detection size 30 x 30 x 1 mm , ambient temperature -25...+70°C, pressure-resistant up to 60 bar|Inductive proximity switch||Inductive proximity switch EBN830187||Polyester fleece adhesive tape 8560 15mmx50m 3 inch core black|Polyester fleece adhesive tape 8560 15mmx50m 3 inch core black||Duct tape EBN830188||Ideally suited for bundling and reinforcing cables and wiring harnesses, especially in vehicles. Excellent noise dampening thanks to fleece coating for machine processing. Also suitable for use in the engine compartment due to the high temperature resistance|Polyester fleece adhesive tape 8560 19mmx50m 3 inch core black||Cable pulling device EBN830189||Shielded 19'/1U patch panel, for holding up to 24 PS-GG45 7A modules with keystone clip or up to 24 keystone modules, the modules snap effortlessly into the patch panel frame without any additional mounting accessories Required ports can be closed with blind covers, front panel made of stainless steel, strain relief via cable ties, delivery without modules|Unilan patch panel Keystone 19' 1U MGK 24xGG45 stainless steel||Patch panel copper EBN830190||One keystone port with 19.2 x 14.9 mm Integrated labeling field Two holes for screw fastening, distance 28.9 mm Material: die-cast zinc Dimensions (LxWxH): 9.8 x 19.1 x 35.5 mm|Bracket 86213 Keystone for device installation||Accessories mechanical lights EBN830191||Denver Bluetooth Earbuds TWE-49ENC, Bluetooth V5.3, range up to 10m, 4 integrated microphones for phone calls with ENC function (the earphones reduce wind and interference noise), lithium polymer battery, charging in the charging case, up to 6 .5 hours of speaking and music playback|Bluetooth® headset TWE-49ENC||Headphones EBN830192||DAB+ and FM tuner, CD player, AUX input, cassette deck, 2x 15 watt output power, backlit LCD display, clock and alarm function, mains or battery operation possible, dimensions (W x H x D): 23 x 12 x 23 .9cm|DAB+ boom box TDC-280W||Radio EBN830193||DAB+ digital radio, FM radio, Bluetooth function, DOT matrix LCD display, sets the clock automatically via DAB, 40 station presets for DAB+ and 40 for FM, 3.5 mm headphone output, output power: 2.5 W RMS, telescopic antenna, remote control included|DAB+ Radio DAB-48Grey||Radio EBN830194||Bluetooth speaker battery operated, 6 LED light modes and 4 LED colors, TWS connection for pairing 2 speakers, solid nylon carrying strap, AUX input|Speaker BTV-213BD Bluetooth®||Headphones EBN830195||Bluetooth speaker battery operated, 6 LED light modes and 4 LED colors, TWS connection for pairing 2 speakers, solid nylon carrying strap, AUX input|Speaker BTV-213BU Bluetooth®||Headphones EBN830196||Bluetooth speaker battery operated, 6 LED light modes and 4 LED colors, TWS connection for pairing 2 speakers, solid nylon carrying strap, AUX input|Speaker BTV-213GR Bluetooth®||Headphones EBN830197||Bluetooth party speaker BPS-352, sound system with powerful 3,600 mAh battery for up to 3 hours of music playback and rich sound at 50% volume, 4-5 hours charging time, 2 speakers 6.5', max. 300W (30W RMS), for To use the TWS function, a second sound system is required, 2 microphone inputs, USB and micro SD card slot for playing MP3, WMA or WAV files, AUX input, LED light effect, including microphone, power supply|Trolley speaker BPS-352 Bluetooth®||Headphones EBN830198||LED worklight CARRY, 20W, 1800lm, 6000K|LED work light LB23 Worklight Carry 20W 1800lm 18V 6000K||Hand spotlight EBN830199||LED converter 40W, 900mA, on/off, AMP plug secondary, 40W, 900mA, 27-42V, connection box primary|LED control gear 37.8W Vin 220-240V Vout 27-42V 900mA||Led control EBN830200||LED cultivation panel 400 EASYFIX / UGR|LED ceiling light LB23 400 Easyfix 20W 1850lm 4000K ws||Ceiling-/wall luminaire EBN830201||LED cultivation panel 1200 EASYFIX / UGR|LED ceiling light LB23 Panel EASYFIX 300x1200 40W 4000K 4000lm||Ceiling-/wall luminaire EBN830202||LED cultivation panel 625 EASYFIX / UGR|LED ceiling light LB23 Panel EASYFIX 622x622 40W 4000K 4000lm||Ceiling-/wall luminaire EBN830203||Suitable for computer workstations, white aluminum, opal acrylic cover, for T-profile ceilings Modular 625, beam angle 90, with power supply L147 W44 H30mm, average LED service life 50,000 hours (L70 W50), UGR 80, operating|LED recessed light Butterfly 622x622 40W 4000K 4000lm ws||Ceiling-/wall luminaire EBN830204||Mercury-free lamp, high color rendering Ra >80, low energy consumption, long service life, shock and vibration resistant, no UV component in the light beam, no warm-up time, 100% light immediately, direct replacement for conventional lamps, low heat generation|LED module flat 5W 4000K 110° 350lm dimmable white||Led lamp multi-led EBN830205||LED pendant light SKY, 28W/40W, 120cm, UGR|LED pendant light Sky 28/40W 120cm 2600-4000lm IP20 white||Pendant lights EBN830206||LED pendant light SKY, 40W/60W, 1050mA/1500mA, 3720-6000lm, IP20, 85°, Up&Down (20/80)|LED pendant light Sky 40/60W 150cm 3720-6000lm IP20 white||Pendant lights EBN830207||Aluminum, beam angle 60°, can be rotated and swiveled 360°|LED track spotlight LB23 white aluminum rotatable and swiveling 3300lm 4000K||Spotlights - searchlights EBN830208||White metal, cover plastic opal shiny, with bayonet lock, with HF sensor 360°, range approx. 0-6m, time setting approx. 5 seconds - 30 minutes, twilight switch adjustable 2-50 lux|LED wall / ceiling light LB23 with sensor IP44 22W 4000K 120° round||Ceiling-/wall luminaire EBN830209||Use (example) carport, basement, courtyard, path lighting (without direct ventilation), etc.|LED wall / ceiling light LB23 black 840lm 4000K IP54||Ceiling-/wall luminaire EBN830210||LED outdoor wall light PILAR square, anthracite, 8W/3000K, 600lm, 350mA, 230V, IP54|LED wall light LB23 8W 3000K 600lm 110°||Ceiling-/wall luminaire EBN830211||SDS M16 spigot with conical holder for the center drill|Mounting shaft SDS M16 3-set centering b. K130+expulsion kit||Holder shaft - core bit EBN830212||Standard diamond socket bit, working length 70 mm, diameter 68 mm, M16, universal application area (masonry, lightweight concrete, materials up to gross density 2.0), side slot, blue|Drill bit DSU Laser Universal M16 68mm side cut||Core bit EBN830213||Standard diamond socket bit, working length 70 mm, diameter 82 mm, M16, universal application area (masonry, lightweight concrete, materials up to gross density 2.0), side slot, blue|Drill bit DSU Laser Universal M16 82mm side bar||Core bit EBN830214||Sintered diamond cutting disc, segmented cutting edge, segment height 10 mm, for concrete, brick, medium-hard and soft clinker, general construction site material|Diamond cutting disc BSXE10 115 22.23||Cutting-off wheel EBN830215||Sintered diamond cutting disc, segmented cutting edge, segment height 10 mm, for concrete, brick, medium-hard and soft clinker, general construction site material|Diamond cutting disc BSXE10 125 22.23||Cutting-off wheel EBN830216||Sintered diamond cutting disc, segmented cutting edge, segment height 10 mm, for concrete, brick, medium-hard and soft clinker, general construction site material|Diamond cutting disc BSXE10 150 22.23||Cutting-off wheel EBN830217||For hard materials, segmented cutting edge, segment height 12 mm, transparency of the disc during the cut enables control of the opposite cutting edge, reduced noise, self-cooling in dry cutting, long service life, areas of application: granite, concrete, reinforced concrete, roof tiles, hard clinker, medium-hard clinker, Exposed concrete, construction site material|Diamond cutting disc Twister plus 125 22.23||Cutting-off wheel EBN830218||Diamond cutting disc Safe Protex INOX, freehand cutting disc, for stainless steel sheets, plates, ropes and pipes, not permitted for side grinding|Cutting disc Safeprotex INOX 1.0 115 22.23||Cutting-off wheel EBN830219||Diamond cutting disc Safe Protex INOX, freehand cutting disc, for stainless steel sheets, plates, ropes and pipes, not permitted for side grinding|Cutting disc Safeprotex INOX 1.0 125 22.23||Cutting-off wheel EBN830220||Panel mount signaling device, Ø 43, gray|Piezo signal generator B/CP-28 DIGISOUND||Buzzer EBN830221||External cover for DL 40, weather protection hood, plastic, white, 223x223x47 mm|Outer hood AH-K plastic for DL40||Ventilation grid EBN830222||Decentralized living room ventilation device with heat recovery for controlled ventilation of individual rooms. The installation takes place directly into an external wall without air ducts. Always installed in pairs, the devices are equipped with an efficient, pulsating and very quiet running fan. While one ventilation device brings fresh air into the room, the second device pumps stale air outside. After 70 seconds, the push-pull devices change the air direction. A heat exchanger recovers the heat contained in the exhaust air to heat the supplied outside air. Functionally necessary for the installation is a wall sleeve (round, round insulated or square insulated version) and an outer and inner panel, each made of metal. The compact control, which is not included in the scope of delivery, takes over the control of the air units.|Decentralized ventilation unit DL 40 AU with heat recovery||Ventilation unit EBN830223||Lockable inner panel with integrated sound insulation, color white (RAL 9016).|Inner cover IB-F fixed for DL40||Ventilation unit EBN830224||Compact control for DL 40 AirUnit. Up to six DL 40 AU can be connected. For more than six DL 40 Air Units, the expansion set for compact control must be purchased. Up to two expansion sets are possible. The compact control including frame can be mounted either surface-mounted or flush-mounted in simple device boxes. Various parameters, such as air flow +/-, cross ventilation for summer operation, filter and fault display, can be set and read on the control panel. Incl. cover frame, cannot be combined with other switch programs.|Compact control KREG DL 40||Ventilation unit EBN830225||Immersion heater for electrical heating support in mono-energy system operation, consisting of individual radiators with temperature controller, safety temperature limiter, protection class IP 54, 1½' male thread with plastic cover, meets the requirements of EN 60335-T1. Not suitable for enamelled hot water tanks.|Immersion heater CTHK 633||Electric heating flange hot water EBN830226||Thermally insulated round wall installation sleeve made of NEOPOR 495 mm with integrated gradient and enclosed plaster covers for protection during installation in the shell construction phase or renovation. Length of 495 mm and diameter of 198 mm. Min. wall thickness of 260 mm.|Wall duct R-S500R Neopor for DL40||Ventilation unit EBN830227||Round LED ceiling light CYBA, two separately controllable LED light sources, Rainbow RGB on the side, incl. remote control, starry sky effect that glitters with many small stars, both light sources (ambient and main light) can be controlled and dimmed separately via the remote control , 1x LED 19W/2700-5000K and 1x 2.5W/RGB, 1200 lumens, H 90 x W 450 x W 450 mm, IP20, additional item no.: 100.541.72|LED ceiling light LB23 26W 2700-5000+RGBKK silver||Ceiling-/wall luminaire EBN830228||Modern round LED ceiling light for living room and dining room, black with wood decor, shape change thanks to swiveling light ring, warm white light (3000K), 1x LED board 25.5W, total 29W, 3300 lumens (effective 1100 lumens), light weight 1.405 kg, HxWxW 82 x 334 x 500 mm, IP20, item no.: 100.558.74|LED ceiling light LB23 aluminum wood decor sw 25.5W 1800lm||Ceiling-/wall luminaire EBN830229||Modern round LED ceiling light for living room and dining room, silver, shape change through swiveling light ring, warm white light (3000K), 1x LED board 25.5W, total 29W, 3300 lumens (effective 1100 lumens), light weight 1.405 kg, HxWxW 82 x 334 x 500 mm, IP20, item no.: 100.558.72|LED ceiling light LB23 aluminum steel 25.5W 1800lm||Ceiling-/wall luminaire EBN830230||Modern round LED ceiling light for living room and dining room, black, shape change through swiveling light ring, warm white light (3000K), 1x LED board 25.5W, total 29W, 3300 lumens (effective 1100 lumens), light weight 1.405 kg, HxWxW 82 x 334 x 500 mm, IP20, item no.: 100.558.73|LED ceiling light LB23 aluminum sw 25.5W 1800lm||Ceiling-/wall luminaire EBN830231||LED ceiling light in an elegant black design, depth effect due to mirror effect, continuously dimmable, separately switchable, RGB Rainbow, CCT 2700-5000K via remote control, 36 watts, 1250 lumens effective, LxWxH 700 x 390 x 70 mm, IP20, item number 100.555.61|LED ceiling light LB23 aluminum sw dim. RGBWW 43W 3750lm||Ceiling-/wall luminaire EBN830232||LED table lamp MANDY, white, incl. pull switch, solar powered, battery operated, 3 dimming levels, timer function, outdoor area, incl. USB charging cable, 2 watts, 155 lumens, 0.8 kg, IP44, H 300 x W 140 x W 140 mm, Additional item no.: 100.520.00|LED solar table lamp LB23 2W 3000K 155lm IP44 white||Table lamp EBN830233||Pendant light, black, light wood, shade inside gold-colored for warm light, 1-bulb, E27 max. 25 watts, IP20, H 1200 x W 450 x W 450 mm, additional item no.: 100.543.07|Pendant light LB23 max. 25W black metal wood appliqué.||Pendant lights EBN830234||LINEN pendant light, natural linen fabric, wood appliqué, ceiling mounting and cable in black, 2-bulb, E27 max. 60 watts, IP20, H 1500 x W 450 x W 1000 mm, additional item no.: 100.536.97|Pendant light LB23 max. 2x60W linen natural fabric wood appli.||Pendant lights EBN830235||LINEN pendant light, gray fabric, wood appliqué, ceiling mounting and cable in black, 1-bulb, E27 max. 60 watts, IP20, H 1500 x W 450 x W 450 mm, additional item no.: 100.536.95|Pendant light LB23 max. 60W gray fabric wood appli.||Pendant lights EBN830236||LINEN pendant light, gray fabric, wood appliqué, ceiling mounting and cable in black, 2 bulbs, 2x E27 max. 60 watts, IP20, H 1500 x W 450 x W 1000 mm, additional item no.: 100.536.98|Pendant light LB23 max. 60W gray fabric wood appli.||Pendant lights EBN830237||LINEN pendant light, natural linen fabric, wood appliqué, ceiling mounting and cable in black, 1-bulb, E27 max. 60 watts, IP20, H 1500 x W 450 x W 450 mm, additional item no.: 100.536.94|Pendant light LB23 max. 60W linen-natural fabric wood appli.||Pendant lights EBN830238||Ergonomic and comfortable design for cleaning fiber optic FC/SC/ST connections, consistent cleaning results due to its precise mechanical action, economical solution with up to a maximum of 800 cleanings possible with one device, cleans both APC and UPC connections, effectively against a variety of contaminants (e.g.: dust / lint / oil / grease), for 2.5mm ferrule|Smart Cleaner Ferrule LC/MU 1.25mm||Spray EBN830239||For cleaning ferrules and connector end faces. After a 'click” noise, cleaning is finished. They are suitable for 800+ cleaning processes|Smart Cleaner Ferrule SC/ST/FC/E2000 2.50mm||Spray EBN830240||19' sheet steel splice box for LC-Duplex, multimode with front panel and mounted couplings with ceramic sleeves, continuously extendable (drawer technology principle), sheet steel, painted in light gray RAL7035, completely ready for splicing, depth adjustable, folds out by 45°, lower level removable, locking with plastic quick-release fastener , Splice box is equipped at the factory (plastic couplings, fiber pigtails (semiless), splice cassette, splice comb and plastic cable glands 6-11mm), all fiber pigtails are inserted as standard ready for splicing, set down, labeled in the cassette and assembled in an orderly manner, all couplings are firmly and securely screwed, unused outlets and ports are provided with blind plugs|19' 1U splice box RAL7035 excl. 24xLCD coupling, 48x pigtails OM4||Patch panel fiber optic EBN830241||19' sheet steel splice box for LC-Duplex, OS2, Singlemode 9µ, with front panel and mounted couplings with ceramic sleeves, continuously extendable (drawer technology principle), sheet steel, painted in light gray RAL7035, completely ready for splicing, depth adjustable, can be folded out by 45°, lower level can be removed , locking using a plastic quick-release fastener, splice box is equipped at the factory (plastic couplings, fiber pigtails (semiless), splice cassette, splice comb and plastic cable glands 6-11mm), all fiber pigtails are inserted as standard ready for splicing, set down, labeled in the cassette and assembled in an orderly manner, all couplings are fixed and securely screwed, unused openings and ports are provided with blind plugs|19' 1U splice box RAL7035 excl. 24xLCD Kupp, 48x Pigtails OS2||Patch panel fiber optic EBN830242||19' single mode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 12x LCD couplings BLUE SM OS2||Patch panel fiber optic EBN830243||19' multimode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 12x LCD couplings erikaviol. MM OM4||Patch panel fiber optic EBN830244||19' single mode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 12x SCd couplings BLUE SM OS2||Patch panel fiber optic EBN830245||19' multimode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 12x SCd couplings erikaviol. MM OM4||Patch panel fiber optic EBN830246||19' single mode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 6x LCD couplings BLUE SM OS2||Patch panel fiber optic EBN830247||19' sheet steel splice box for LC-Duplex, multimode with front panel and mounted couplings with ceramic sleeves, infinitely extendable (drawer technology principle), sheet steel, painted in light gray RAL7035, completely ready for splicing, depth adjustable, can be folded out by 45°, lower level removable, locking using a plastic quick-release fastener , Splice box is equipped at the factory (plastic couplings, fiber pigtails (semiless), splice cassette, splice comb and plastic cable glands 6-11mm), all fiber pigtails are inserted as standard ready for splicing, set down, labeled in the cassette and assembled in an orderly manner, all couplings are firmly and securely screwed, unused outlets and ports are provided with blind plugs|19' 1U splice box RAL7035 excl. with 6x LCd couplings erikaviol. MM OM4||Patch panel fiber optic EBN830248||19' single mode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 6x SCd couplings BLUE SM OS2||Patch panel fiber optic EBN830249||19' multimode splice box with front panel and mounted couplings with ceramic sleeves, extendable|19' 1U splice box RAL7035 excl. with 6x SCd couplings erikaviol. MM OM4||Patch panel fiber optic EBN830250||19' splice box with unequipped front panel, extendable|19' 1U splice box RAL7035 excl. with front panel 12xSCd unequipped||Patch panel fiber optic EBN830251||Fiber optic media converter multimode (10/100/1000 Mbit), connection: 1x LC duplex - 1x RJ45, protocol: 10/100/1000Base-TX to 1000Base-SX, wavelength: 850nm / range: 550m, SFP module (with DDM function) included, standalone with external power supply (240 V/AC), unmanaged / dual fiber|Fiber optic media converter 1Gbit LCd multimode 850nm 550m||Media converter EBN830252||Fiber optic media converter single mode (10/100/1000 Mbit), connection: 1x LC duplex - 1x RJ45, protocol: 10/100/1000Base-TX to 1000Base-LX, wavelength: 1310nm / range: 20km, SFP module (with DDM function) included, standalone with external power supply (240 V/AC), unmanaged / dual fiber|Fiber optic media converter 1Gbit LCd single mode 1310nm 20km||Media converter EBN830253||Fiber optic patch cable 2G50|Fiber optic patch cable MM OM2 green duplex 2G50 SCd/SCd 1m||Patch cable fiber optic EBN830254||Fiber optic patch cable 2G50|Fiber optic patch cable MM OM2 green duplex 2G50 SCd/ST 1m||Patch cable fiber optic EBN830255||Dx. 50/125µm OM4 pink LCD/LCd 15m|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/LC 15m||Patch cable fiber optic EBN830256||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/LC 1m||Patch cable fiber optic EBN830257||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/LC 2m||Patch cable fiber optic EBN830258||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/LC 3m||Patch cable fiber optic EBN830259||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/LC 5m||Patch cable fiber optic EBN830260||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/SCd 10m||Patch cable fiber optic EBN830261||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/SCd 15m||Patch cable fiber optic EBN830262||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/SCd 1m||Patch cable fiber optic EBN830263||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/SCd 2m||Patch cable fiber optic EBN830264||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/SCd 3m||Patch cable fiber optic EBN830265||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 LCd/SCd 5m||Patch cable fiber optic EBN830266||Dx. 50/125µm OM4 pink SCd/SCd 15m|Fiber optic patch cable MM OM4 pink duplex 2G50 SCd/SCd 15m||Patch cable fiber optic EBN830267||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 SCd/SCd 1m||Patch cable fiber optic EBN830268||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 SCd/SCd 2m||Patch cable fiber optic EBN830269||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 SCd/SCd 3m||Patch cable fiber optic EBN830270||Fiber optic patch cable duplex|Fiber optic patch cable MM OM4 pink duplex 2G50 SCd/SCd 5m||Patch cable fiber optic EBN830271||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/LC 1m||Patch cable fiber optic EBN830272||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/LC 2m||Patch cable fiber optic EBN830273||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/LC 3m||Patch cable fiber optic EBN830274||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/LC 5m||Patch cable fiber optic EBN830275||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/SCd 10m||Patch cable fiber optic EBN830276||Dx. 9/125µm G652.D yellow LCD/SCd 15m|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/SCd 15m||Patch cable fiber optic EBN830277||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/SCd 1m||Patch cable fiber optic EBN830278||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/SCd 2m||Patch cable fiber optic EBN830279||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/SCd 3m||Patch cable fiber optic EBN830280||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 LCd/SCd 5m||Patch cable fiber optic EBN830281||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 SCd/SCd 10m||Patch cable fiber optic EBN830282||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 SCd/SCd 15m||Patch cable fiber optic EBN830283||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 SCd/SCd 1m||Patch cable fiber optic EBN830284||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 SCd/SCd 2m||Patch cable fiber optic EBN830285||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 SCd/SCd 3m||Patch cable fiber optic EBN830286||Fiber optic patch cable duplex|Fiber optic patch cable SM OS2 G657.A2 yellow duplex 2E9 SCd/SCd 5m||Patch cable fiber optic EBN830287||HOTPAC® trunk cable U-DQ(ZN)BH 12G50/125 OM4, pre-assembled on both sides with 12x LC/LC Simplex plugs each, individual whips 2.8mm buffered, including pull-in aid on both sides (slip-resistant + reusable) and meaningful measurement report with serial number, graduated whips, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M20/M25)|Fiber optic trunk cable MM OM4 UDQ 12G50 LC/LC 100m||Patch cable fiber optic EBN830288||HOTPAC® trunk cable U-DQ(ZN)BH 12G50/125 OM4, pre-assembled on both sides with 12x LC/LC Simplex plugs each, individual whips 2.8mm buffered, including pull-in aid on both sides (slip-resistant + reusable) and meaningful measurement report with serial number, graduated whips, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M20/M25)|Fiber optic trunk cable MM OM4 UDQ 12G50 LC/LC 150m||Patch cable fiber optic EBN830289||HOTPAC® trunk cable U-DQ(ZN)BH 12G50/125 OM4, pre-assembled on both sides with 12x LC/LC Simplex plugs each, individual whips 2.8mm buffered, including pull-in aid on both sides (slip-proof + reusable) and meaningful measurement report with serial number, graduated whips, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M20/M25)|Fiber optic trunk cable MM OM4 UDQ 12G50 LC/LC 75m||Patch cable fiber optic EBN830290||HOTPAC® trunk cable U-DQ(ZN)BH 04G50/125 OM4, pre-assembled on both sides with 4x LC/LC simplex plugs each, individual whips 2.8mm buffered, incl. pull-in aid on both sides (step-proof + reusable) and meaningful measurement report with serial number, whips graduated, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M16/M20)|Fiber optic trunk cable MM OM4 UDQ 4G50 LC/LC 150m||Patch cable fiber optic EBN830291||HOTPAC® trunk cable U-DQ(ZN)BH 04G50/125 OM4, pre-assembled on both sides with 4x LC/LC simplex plugs each, individual whips 2.8mm buffered, incl. pull-in aid on both sides (step-proof + reusable) and meaningful measurement report with serial number, whips graduated, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M16/M20)|Fiber optic trunk cable MM OM4 UDQ 4G50 LC/LC 50m||Patch cable fiber optic EBN830292||HOTPAC® trunk cable U-DQ(ZN)BH 08G50/125 OM4, pre-assembled on both sides with 8x LC/LC simplex plugs each, individual whips 2.8mm buffered, including pull-in aid on both sides (slip-resistant + reusable) and meaningful measurement report with serial number, graduated whips, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M20/M25)|Fiber optic trunk cable MM OM4 UDQ 8G50 LC/LC 100m||Patch cable fiber optic EBN830293||HOTPAC® trunk cable U-DQ(ZN)BH 08G50/125 OM4, pre-assembled on both sides with 8x LC/LC simplex plugs each, individual whips 2.8mm buffered, including pull-in aid on both sides (slip-resistant + reusable) and meaningful measurement report with serial number, graduated whips, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M20/M25)|Fiber optic trunk cable MM OM4 UDQ 8G50 LC/LC 125m||Patch cable fiber optic EBN830294||HOTPAC® trunk cable U-DQ(ZN)BH 08G50/125 OM4, pre-assembled on both sides with 8x LC/LC simplex plugs each, individual whips 2.8mm buffered, including pull-in aid on both sides (slip-resistant + reusable) and meaningful measurement report with serial number, graduated whips, suitable for standard 19' patch panels, patented spliceless molded cable splitter with integrated cable gland (M20/M25)|Fiber optic trunk cable MM OM4 UDQ 8G50 LC/LC 150m||Patch cable fiber optic EBN830295||With easy-to-strip (semiless) solid cores with a diameter of 0.9 mm, plugs with ceramic ferrules and the enclosed attenuation measurement report, halogen-free|Fiber optic pigtail LC 50µ OM4 2.0m PU=12 pieces colorful||Fiber optic pigtail EBN830296||With easy-to-strip (semiless) solid cores with a diameter of 0.9 mm, plugs with ceramic ferrules and the enclosed attenuation measurement report, halogen-free|Fiber optic pigtail LC 9µ OS2 2.0m PU=12 pieces colorful||Fiber optic pigtail EBN830297||With easy-to-strip (semiless) solid cores with a diameter of 0.9 mm, plugs with ceramic ferrules and the enclosed attenuation measurement report, halogen-free|Fiber optic pigtail SC 50µ OM4 2.0m PU=12 pieces colorful||Fiber optic pigtail EBN830298||With easy-to-strip (semiless) solid cores with a diameter of 0.9 mm, plugs with ceramic ferrules and the enclosed attenuation measurement report, halogen-free|Fiber optic pigtail SC 9µ OS2 2.0m PU=12 pieces colorful||Fiber optic pigtail EBN830299||With high-quality ceramic sleeves|Fiber optic coupling LC duplex multimode ceramic sleeve heather violet||Fiber optic coupling EBN830300||LC d couplings, LC compatible coding, low insertion loss, easiest installation, SC simplex breakout suitable, MM & SM with ceramic guide (sleeve), according to IEC/PAS 61754-20|Fiber optic coupling LC duplex single mode ceramic sleeve blue||Fiber optic coupling EBN830301||With high-quality ceramic sleeves|Fiber optic coupling SC-Duplex multimode ceramic sleeve heather violet||Fiber optic coupling EBN830302||Splice cassette with 2 crimp splice combs & lid, material ABS+PC (color: BEIGE), for installation in splice boxes or GF modules, max. 24 x crimp splice protection, dimensions (LxWxH) 155x92x10mm|Fiber optic splice cassette with lid for 24x crimp splice protection||Splicing box EBN830303||EasyLan. preLink. / fixLink. Designable module holder SL, with central plate, angled outlet, 1-fold, white, RAL9010|Data connection socket designf.fixLink 45 degrees 1-gang with ZP||Connection box - copper EBN830304||The designable module holder consists of a die-cast zinc frame. It is suitable for installation in a cable duct (EK), for flush-mounting (UP) or using a separate frame for surface mounting (AP). By breaking off two assembly plates|Data connection socket design-capable fixLink 45 degrees 1-gang 2-gang without cover||Connection box - copper EBN830305||PreLink® / fixLink® empty module holder, 45° outlet, flush-mounted, 1-fold, 2-fold, the module holders consist of a zinc die-cast frame and are suitable for installation in a cable duct (EK), for flush-mounting (UP) or also for surface mounting (AP) using a separate frame, ground tank mounting (BT) is also possible by breaking away two mounting tabs, the boxes contain dust protection flaps, a fast-on earth contact and a labeling field, they come with a central plate (50 x 50 mm) and frame ( 80 x 80 mm) delivered|Data connection socket fixLink 45 degrees 1-gang UP empty||Connection box - copper EBN830306||Data connection socket fixLink 45 degrees 3-way flush-mounted, empty|Data connection socket fixLink 45 degrees 3-way flush-mounted, empty||Connection box - copper EBN830307||EasyLan. Surface-mounted frame, 80x80x42mm, white, RAL 9010|Data connection socket fixLink surface-mounted housing 80x80mm AP empty||Connection box - copper EBN830308||EasyLan. preLink. / fixLink. Module holder SL including central plate and frame, 80x80mm, angled outlet 1-fold|Data connection socket preLink / fixLink SL empty 45° UP 1-gang||Connection box - copper EBN830309||EasyLan. preLink. / fixLink. Module holder SL including central plate and frame, 80x80mm, angled outlet 2-fold|Data connection socket preLink / fixLink SL empty 45° UP 2-gang||Connection box - copper EBN830310||PreLink®/fixLink® module holder SL including central plate and frame 80x80mm, 3-fold|Data connection socket preLink / fixLink SL empty 45° UP 3-fold||Connection box - copper EBN830311||House number set with three sets of numbers 0-9 and two sets of letters ah for house number light 4758-030120Height: 8.5 cm|DOTL house number set LB23 f. WALLsquare 24cm 6W 3000K||Accessories mechanical lights EBN830312||Adjustable, glare-free light surfaces for homogeneous illumination with locking function Extremely compact, impact-resistant (IK08) and splash-proof (IP65) plastic housing Ergonomic carrying handle with integrated metal tripod holder Dimmable in three brightness levels 30% light output = 7.0 hours 50% light output = 4.5 hours 100% light output = 2.2 hours (charging time max. 3.8 hours) Includes charging cable for cars/trucks 12/24V and 220 V. Inexpensively replaceable, integrated lithium-ion battery. Continuous operation via 220 V charging cable possible at full brightness level. Integrated battery level indicator|LED battery-powered spotlight LB23 30W 2900lm 6000K daylight Ra>80 7.4V||Spotlights - searchlights EBN830313||The power supply is dimmable via trailing edge dimmer or leading edge dimmer. With constant current technology (CC), it is suitable for lights with constant current. The connected constant current lights can be dimmed between 10%-100%. Suitable dimmers: JUNG 1224 LED UDE, Eltako EUD61NPL-230V, GIRA Mini2440 00 and much more. The output current is adjustable: 700/800/950/1050mA The power supply is set to 700mA by default|LED control gear CC 27-40W 700-1050mA 27-38V dim||Led control EBN830314||Constant current power supply, which can be preset between 350 and 1050mA using a DIP switch.|LED control gear CC 350-1050mA 40W 2-100V dim KNX/Push||Led control EBN830315||LED power supply for LED panels 950mA With constant current technology (CC), it is suitable for lights with constant current. The output current is adjustable: 600/700/950/1050mA The power supply is set to 950mA by default|LED driver CC 600mA-1050mA 42W 220-240V||Led control EBN830316||Glare-free lamp design (UGR Matted and faceted combination reflector ensures even illumination and is insensitive to fingerprints. Metal housing ensures optimal heat dissipation|LED recessed ceiling spotlight CIRCLEugr-eco 35W 3000-5700K||Spotlights - searchlights EBN830317||Rimless luminaire design in IP44 creates a light-flooded atmosphere Adjustable plastic-covered mounting clips for installation openings of 68-210mm Long service life thanks to good thermal management with aluminum core board Constant light color thanks to non-yellowing backlight technology Finished installation height only 19 mm with SOFTEDGE design COLORselect: 3 light colors in one luminaire. The right light color for every application: Warm white 3,000K: hotel, shop, wellness/spa areas, home & living Neutral white 4,000K: office, catering, sanitary, senior citizens and hospitals Daylight white 5,700K: meeting rooms, educational institutions, office