Interface relay pluggable - Switching relay AC 0V DC 24V 8A CR-P024DC2

Interface relay pluggable - Switching relay AC 0V DC 24V 8A CR-P024DC2 – ABB – 1SVR405601R1000 – 4013614498237: Interface relay pluggable CR-P024DC2 Design of the electrical connection plug-in connection, rated current 8A, rated control supply voltage Us at AC 50 Hz 0V, rated control supply voltage Us at AC 60 Hz 0V, rated control supply voltage Us at DC 24 ... 24V, type of voltage for actuation DC, drive, polarity polarized, switching behavior of the drive monostable, number of contacts as opener 0, number of contacts as closer 0, number of contacts as changeover contact 2, type of switching contact single contact, protection class (IP) IP67, width 12.7mm, height 15.7mm, depth 29mm, As an interface, interface relays connect the electronic control level, for example PLC, with the level of the sensors/actuators. They take on various functions: switching direct or alternating voltage loads with different ohmic, inductive and capacitive components, switching in the voltage range from a few mV to 250 V, switching in the current range from a few mA to 16 A, amplification of weak control signals, electrical isolation of control and load circuits and signal multiplication. The CR-P series has 9 different coil voltages with 1-2 changeover contacts. Two socket variants are offered: standard socket and logical socket. Pluggable function modules such as reverse polarity protection / freewheeling diode, LED module, RC elements, overvoltage protection or timer modules expand the areas of application of the pluggable circuit board relays.