Switch actuator KNX SA 8M230 REG - KNX sunblind shutter actuator 8-ch 2014576

Switch actuator KNX SA 8M230 REG - KNX sunblind shutter actuator 8-ch 2014576 – Warema – 4251317203776: Switch actuator KNX SA 8M230 REG 2014576 bus system KNX, other bus systems without, mounting type REG, width in modular units 6, with bus coupling, local/manual operation, with LED display, switching current ohmic 2.1A, max. switching capacity 500W, max. number of Blind outputs 8, type of current AC, degree of protection (IP) IP30, two sun protection drives with 230 V AC can be switched with the WAREMA KNX SA 8M230 sun protection actuator in the REG housing. Emergency/manual operation via safety mat for diagnosis and operation on the actuator. Easily replaceable fine-wire fuses ensure optimum cable protection for the connected components in the event of a short circuit. Preset basic parameters for selecting blind/venetian blind operation, roller shutter/textile sun protection or window awning with ZIP guidance. The three global security objects and one additional security object per output with different priorities and cyclic monitoring can be freely assigned and the reaction to security objects in the event of an alarm or after an alarm can be selected. With the actuator it is possible to switch on external automatic systems. For this purpose, the manual and automatic input are separated in terms of blind height and slat position. There is also the option of restricting manual operation using the automatic objects (cut off, etc.). Received telegrams can be saved and made up for during the automatic switch-off, and you can also define a status after the switch-off. The actuator has 8 scene objects per output. Status of hanging height, status of holding time, status of upper end position reached and slat angle can be sent or read out for each output. Creeping speed can be parameterized when starting the engine. It is possible to set correction times/delay time when approaching.