SSI encoder interface SSI/24Bit/125kHz/Bin - Fieldbus function-/technology module 750-630/000-001
750-630/000-001
4045454879822
EAN/GTIN
DE 40917098
WEEE
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.
Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Supply voltage DC=24 V, Voltage type of supply voltage=DC, Number of functions=1, With optical...
more
SSI encoder interface SSI/24Bit/125kHz/Bin - Fieldbus function-/technology module 750-630/000-001 – WAGO – 4045454879822: Supply voltage DC=24 V, Voltage type of supply voltage=DC, Number of functions=1, With optical interface=no, Supporting protocol for TCP/IP=no, Supporting protocol for PROFIBUS=no, Supporting protocol for CAN=no, Supporting protocol for INTERBUS=no, Supporting protocol for ASI=no, Supporting protocol for KNX=no, Supporting protocol for MODBUS=no, Supporting protocol for Data-Highway=no, Supporting protocol for DeviceNet=no, Supporting protocol for SUCONET=no, Supporting protocol for LON=no, Supporting protocol for PROFINET IO=no, Supporting protocol for PROFINET CBA=no, Supporting protocol for SERCOS=no, Supporting protocol for Foundation Fieldbus=no, Supporting protocol for EtherNet/IP=no, Supporting protocol for AS-Interface Safety at Work=no, Supporting protocol for DeviceNet Safety=no, Supporting protocol for INTERBUS-Safety=no, Supporting protocol for PROFIsafe=no, Supporting protocol for SafetyBUS p=no, Supporting protocol for other bus systems=yes, Radio standard Bluetooth=no, Radio standard Wi-Fi 802.11=no, Radio standard GPRS=no, Radio standard GSM=no, Radio standard UMTS=no, IO link master=no, System accessory=yes, Suitable for counting=no, Suitable for weighing=no, Suitable for temperature control=no, Suitable for welding control=no, Suitable for pressure control=no, Suitable for NC=no, Suitable for electronic positioning=yes, Suitable for CNC=no, Suitable for SSI=yes, Suitable for incremental data detection=no, Suitable for detection absolute value=no, Suitable for flux controller=no, Suitable for flux measurement=no, Suitable for path controller=no, Suitable for cam controller=no, Suitable for flying saw=no, Suitable for multi-axis control=no, Suitable for single-axis controller=no, Suitable for multi-axis positioning=no, Suitable for single-axis positioning=no, Function block restart blockage=no, Function block automatic reset=no, Contactor control function block=no, Function block emergency stop=no, Function block contactless working protection installation=no, Function block affirm pushbutton=no, Function block 2-hand switching=no, Function block operating mode selection=no, Function block access control=no, Degree of protection (IP)=IP20, Fieldbus connection over separate bus coupler possible=yes, Frequency measurement=no, Rail mounting possible=yes, Wall mounting/direct mounting=no, Front built-in possible=no, Rack-assembly possible=no, Suitable for safety functions=no, Appendant operation agent (Ex ia)=no, Appendant operation agent (Ex ib)=no, Explosion safety category for gas=None, Explosion safety category for dust=None, Width=12 mm, Height=64 mm, Depth=100 mm
...
more
Supply voltage at DC | 24V |
Voltage type of the supply voltage | DC |
Number of functions | 2 |
With optical interface | no |
Supports protocol for TCP / IP | no |
Supports protocol for PROFIBUS | no |
Supports protocol for CAN | no |
Supports protocol for INTERBUS | no |
Supports protocol for ASI | no |
Supports protocol for KNX | no |
Supports protocol for MODBUS | no |
Supports data highway protocol | no |
Supports protocol for DeviceNet | no |
Supports protocol for SUCONET | no |
Supports protocol for LON | no |
Supports protocol for PROFINET IO | no |
Supports protocol for PROFINET CBA | no |
Supports protocol for SERCOS | no |
Supports protocol for EtherNet / IP | no |
Supports protocol for DeviceNet Safety | no |
Supports protocol for INTERBUS safety | no |
Supports protocol for PROFIsafe | no |
Supports protocol for SafetyBUS p | no |
Wireless standard Bluetooth | no |
Wireless standard WLAN 802.11 | no |
Radio standard GPRS | no |
Radio standard GSM | no |
Radio standard UMTS | no |
IO-Link master | no |
System component | yes |
Suitable for counting | no |
Suitable for weighing | no |
Suitable for temperature control | no |
Suitable for welding control | no |
Suitable for pressure control | no |
Suitable for NC | no |
Suitable for position detection | yes |
Suitable for CNC | no |
Suitable for SSI | yes |
Suitable for incremental value acquisition | no |
Suitable for absolute value acquisition | no |
Suitable for flow control | no |
Suitable for flow measurement | no |
Suitable for railway control | no |
Suitable for cam control | no |
Suitable for flying saw | no |
Suitable for multi-axis control | no |
Suitable for single-axis control | no |
Suitable for multi-axis positioning | no |
Suitable for single-axis positioning | no |
Function block restart interlock | no |
Function block automatic reset | no |
Contactor control function block | no |
Function block EMERGENCY STOP | no |
Function block acknowledgment button | no |
Function block two-hand circuit | no |
Function block operating mode selection | no |
Function block access control | no |
IP protection) | IP20 |
Frequency measurement | no |
Rail mounting possible | yes |
Wall / direct mounting possible | no |
Front installation possible | no |
Rack mounting possible | no |
Suitable for safety functions | no |
Associated equipment (Ex ia) | no |
Associated equipment (Ex ib) | no |
Width | 12 mm |
Height | 100 mm |
Depth | 69.8 mm |
Cookie settings
This website uses cookies that are required for the technical operation of the website and always stored. Other cookies that enhance convenience when using this website, or that are intended for direct marketing or to simplify interaction with other websites and social networks, are only stored with your consent.
Configuration
Technically required
These cookies are required for the basic functions of the shop.
Accept all cookies
Amazon Pay
CSRF token
Cookie settings
Currency change
Customer recognition
Customer-specific caching
FACT-Finder tracking
Individual prices
Reject all cookies
Selected shop
Session
Wish list
Device recognition
Saferpay payments
PayPal payments
IP2location
Listing settings
Trustami
Wishlist
TagManager
Statistics and tracking
Google analytics
Partner program
Custom tracking