Potential feed DC24V, fuse stop - Fieldbus power supply/segment module 750-610

750-610 4045454396145 EAN/GTIN DE 40917098 WEEE

Our best price
$43.73 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Potential feed DC24V, fuse stop 750-610 supply voltage at DC 24...24V, voltage type of the supply... more
Potential feed DC24V, fuse stop - Fieldbus power supply/segment module 750-610 – WAGO – 4045454396145: Potential feed DC24V, fuse stop 750-610 supply voltage at DC 24...24V, voltage type of the supply voltage DC, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW -Interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, system component, degree of protection (IP) IP20, design of the electrical connection spring-loaded connection, with feed module, suitable as a segment module, fieldbus connection possible via separate bus coupler, bus diagnostics possible, DIN rail mounting possible, explosion protection category for gas ATEX gas -Ex protection, cat. 3G, explosion protection category for dust ATEX dust explosion protection, cat. 3D, width 12mm, height 64mm, depth 100mm, the feed terminal d ient for supplying the Bus Terminals with the respective supply potential. The maximum current that may flow through the feed terminal is 6.3 A. When configuring the system, make sure that this total current is not exceeded. If this is the case, an additional feed terminal must be used. The feed terminal must be protected by a fuse (size 5 x 20 mm). The replacement can be done quickly and easily by pulling out the fuse holder. A defective fuse and the status of the operating voltage are signaled via LEDs. The bus terminal transmits a bit for the status of the fuse and a second bit for the status of the operating voltage to the fieldbus coupler.
... more
Supply voltage at DC 24V
Voltage type of the supply voltage DC
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
System component yes
IP protection) IP20
With electrical isolation no
With feed module yes
Suitable as a segment module yes
Distance module no
Bus diagnostics possible yes
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Width 12 mm
Height 100 mm
Depth 69.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Potential feed DC24V, fuse stop - Fieldbus power supply/segment module 750-610"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.