Relay output terminal 2-channel 125VAC 30VDC - Fieldbus digital module 0 In / 2 Out 750-514

WAGO - 750-514 - Relay output terminal 2-channel 125VAC 30VDC - Fieldbus digital module 0 In / 2 Out 750-514
Photo source: fig. possibly similar
Photo source: fig. possibly similar
750-514 4045454393489 EAN/GTIN DE 40917098 WEEE

Our best price
$71.10 excl. VAT

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Relay output terminal 2-channel 125VAC 30VDC 750-514 supply voltage at DC 24... 24V, type of... more
Relay output terminal 2-channel 125VAC 30VDC - Fieldbus digital module 0 In / 2 Out 750-514 – WAGO – 4045454393489: Relay output terminal 2-channel 125VAC 30VDC 750-514 supply voltage at DC 24... 24V, type of supply voltage DC, number of digital inputs 0, number of digital outputs 2, type of digital output relay, output current 0.5A, permissible voltage at the output 125 ... 125V, type of output voltage AC, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW -Interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, supported Protocol for other bus systems, system components, degree of protection (IP) IP20, design of the electrical connection spring-loaded connection, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, explosion protection category category for gas without, explosion protection category for dust without, width 12mm, height 73mm, depth 100mm, Control signals from the automation device are passed on to the connected actuators via the digital output terminal. The internal system voltage is used to control the relays. The contacts are potential-free. The control status of the relay is signaled via LED. Actuators with a PE connection can be wired directly.
... more
Supply voltage at DC 24V
Voltage type of the supply voltage DC
Number of digital outputs 2
Digital inputs configurable no
Digital outputs configurable no
Type of digital output Relay
Output current 0.5 A
Permissible voltage at the output 125V
Type of output voltage AC
Short-circuit protection, outputs available no
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
IO-Link master no
System component yes
IP protection) IP20
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for gas without
Explosion protection category for dust without
Width 12 mm
Height 100 mm
Depth 69.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Relay output terminal 2-channel 125VAC 30VDC - Fieldbus digital module 0 In / 2 Out 750-514"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.