Current measuring module 2Ai 0-5A AC/DC - Fieldbus analogue module 2 In / 0 Out 750-475/020-000

Current measuring module 2Ai 0-5A AC/DC - Fieldbus analogue module 2 In / 0 Out 750-475/020-000 – WAGO – 4045454493073: Current measuring module 2Ai 0-5A AC/DC 750-475/020-000 Supply voltage at AC 50 Hz 24... 24V, supply voltage at AC 60 Hz 24... 24V, supply voltage at DC 24... 24V, type of supply voltage AC /DC, input, current, resolution of the analog inputs 12-bit, number of analog inputs 2, number of analog outputs 0, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, Number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW -Interfaces USB 0, number of HW interfaces other 0, system component, degree of protection (IP) IP20, design of the electrical connection spring-loaded connection, fieldbus connection via separate bus coupler possible, DIN rail mounting possible, explosion protection category for gas without, explosion protection tz category for dust free, width 12mm, height 64mm, depth 100mm, The analog input terminal handles AC and DC currents in the range 0 to 1 A rms. The effective value of the current is measured and displayed with a resolution of 100 µA. The maximum value of the current must not exceed 2 A. The two measuring channels are galvanically isolated from each other. The input signal is transmitted galvanically isolated to the system level. The system voltage is used for the power supply. The input channels of the module are differential inputs. The shield connection is routed directly to the mounting rail.