Lightning and surge protection. Type 1 and Type 3 - Combined arrester for signal systems UGF13-1

Televes - UGF13-1 - Lightning and surge protection. Type 1 and Type 3 - Combined arrester for signal systems UGF13-1
Photo source: fig. possibly similar
Photo source: fig. possibly similar
UGF13-1 494801 8424450190517 EAN/GTIN DE 88009665 WEEE

Our best price
$96.45 excl. VAT
$113.86 (-15.29% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Lightning and overvoltage protection type 1 and type 3 UGF13-1 Maximum continuous voltage DC 24V,... more
Lightning and surge protection. Type 1 and Type 3 - Combined arrester for signal systems UGF13-1 – Televes – 494801 – 8424450190517: Lightning and overvoltage protection type 1 and type 3 UGF13-1 Maximum continuous voltage DC 24V, lightning impulse current (10/350 µs) 2.5kA, nominal discharge current (8/20) 10kA, nominal load current 2A, protection level 230V, frequency 5 ... 2400MHz, mounting type Top-hat/G-rail TH35/G32, connection 1 F-connector, The UGF13-1 is a combined arrester with F-connection, suitable for remote feeding, for 75-ohm SAT and BK systems. The arrester corresponds to the increased shielding requirements of class A according to EN 50083-2. The combination arrester with integrated measurement output consists of a type 1 lightning current arrester (general protection) and a type 3 surge arrester (fine protection) and is suitable for space-saving installation in all common TV and satellite applications. Test standard / approval EN61643-21. Dimensions LxWxH = 14.5 x 4 x 9 cm.
... more
Highest continuous voltage DC 24V
Lightning impulse current (10/350 µs) 2.5 kA
Nominal discharge current (8/20) 10 kA
Nominal load current 2 A
Protection level 230V
Frequency 5..2400 MHz
Mounting Hat/G-rail TH35/G32
Connection 1 F-connector
SPD no
With telecommunication contact no
Explosion-tested version no
Separation option for signal circuit no
Number of conductors (without earth) 1
Earthing via separate head
Overall width 36 mm
IP protection) other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Lightning and surge protection. Type 1 and Type 3 - Combined arrester for signal systems UGF13-1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.