Junction box UMJ45 8/8 surface mounting Cat.5e alpine white - 2x RJ45 8(8) Data outlet Cat.5E whi...

Telegärtner - J00023A0176 - Junction box UMJ45 8/8 surface mounting Cat.5e alpine white - 2x RJ45 8(8) Data outlet Cat.5E whi...
Photo source: fig. possibly similar
J00023A0176 4018359274153 EAN/GTIN DE 76541091 WEEE

Our best price
$49.30 excl. VAT
$75.33 (-34.55% RRP***)
(For 5 Piece) plus shipping

15-16 days* (USA)

x 5 Piece
Add to wish list
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Junction box UMJ45 8/8 Ap Cat.5e alpine white J00023A0176 surface-mounted, duct installation,... more
Junction box UMJ45 8/8 surface mounting Cat.5e alpine white - 2x RJ45 8(8) Data outlet Cat.5E whi... – Telegärtner – 4018359274153: Junction box UMJ45 8/8 Ap Cat.5e alpine white J00023A0176 surface-mounted, duct installation, type of fastening screws, connector type 2x RJ45 8(8), with sockets/couplings, suitable for number of sockets/couplings 2, category 5E, color white, connection type LSA, separate cable strain relief , mounting type shield connection without, outlet direction sloping, degree of protection (IP) IP20, color coding, transmission properties: Cat.6A (ISO/IEC) according to ISO/IEC 11801, EN 50173-1, fully shielded, 360° shield contact and cable strain relief via two (one for Cat.5e) separate screw terminals for the outer cable sheath and shield, cable feed possible from all directions in 8x 45° steps, optional horizontal and vertical installation option in the wall duct thanks to variable cable entry, design with low installation depth, easy installation in the floor box thanks to lateral cable routing within the device cup, possibility of pluggable ground connection on all 4 corners, according to DIN 46342-1, 6.3 mm, Can be combined with covers from various switch range manufacturers, controlled wire pre-sorting guarantees wire routing without risk of damage and good transmission properties, central plate with hinged and captive, transparent labeling field, protective flaps secured, 1-way (8) and 2-way sockets (8/8, 2x8 (4)) Available, Contact overbending protection: 6- (RJ11/12) and 8-pin plugs (RJ45) can be used alternately in the sockets without additional installation work, unshielded, Stable, compact, ergonomic design, which is easy to hold during installation 1-way (8) and 2-way sockets (8/8, 2x8(4)) available, independent AP design available, an AP supplementary set is not required, contact overbending protection: 6-(RJ11/12) and 8-pin plugs (RJ45) can be used alternately in the sockets without additional installation work, cable strain relief using standard cable ties included in the scope of delivery, UP: cable feed using central cable strain relief load from 8 directions in 45° steps, surface-mounted: cable feed from 4 directions in 90° steps, optional horizontal and vertical installation option in the wall duct using four-hole support ring and freely selectable cable entry, 1-way (8) and 2-way sockets (8/ 8, 2x8(4)) available, design with low installation depth (29 mm), easy installation in the floor box, can be combined with covers from various switch range manufacturers, controlled wire pre-sorting guarantees wire routing without risk of damage and good transmission properties, protective flaps can be retrofitted, can be supplied with customer-specific integration on request , Central plate with hinged and captive, transparent labeling field can be retrofitted or can be delivered fully assembled according to customer specifications, design: surface-mounted, 2xRJ45, colour: alpine white, UMJ45 8/8 Ap Cat.5e
... more
Wall-mounted installation yes
Flush mounting no
Ducted yes
Floor box / sub-floor mounted no
Mounting screw
Connector type 2x RJ45 8 (4)
With sockets / couplings yes
Suitable for number of sockets / couplings 2
Category 5E
Colour white
Connection LSA
Shielded sockets no
Housing shielded no
Separate ground connection no
With text box no
Design suitable no
Separate cable strain relief yes
Mounting type shield connection without
Outlet aslant
With dust protection no
With terminator no
IP protection) IP20
Mechanical coding no
Colour-coded yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Junction box UMJ45 8/8 surface mounting Cat.5e alpine white - 2x RJ45 8(8) Data outlet Cat.5E whi..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.