Patch panel MPP16-HS Category 6A RAL7035 - Patch panel copper 16x RJ45 8(8) J02022A0050

J02022A0050 4018359363284 EAN/GTIN DE 76541091 WEEE

Our best price
$96.96 excl. VAT
$191.13 (-49.27% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
PatchPanel MPP16-HS Cat.6A RAL7035 J02022A0050 Number of sockets/couplings 16, Suitable for... more
Patch panel MPP16-HS Category 6A RAL7035 - Patch panel copper 16x RJ45 8(8) J02022A0050 – Telegärtner – 4018359363284: PatchPanel MPP16-HS Cat.6A RAL7035 J02022A0050 Number of sockets/couplings 16, Suitable for number of sockets/couplings 16, Connector type RJ45 8(8), Shielded, Category 6A (IEC), Connection type LSA, Number of height units (HU) 1, Color grey, RAL number 7035, type of installation 482.6 mm (19 inch) installation, height 44 mm, width 482.6 mm, depth 100 mm, 19 inch/10 inch slide-in housing 1 U with 12, 16 or 24 RJ45 connection sockets on one common printed circuit board, 360° shielding contact by means of clamps directly on the printed circuit board, without additional twisting of the braided shield (shielded version), connection of the wires via LSA-Plus insulation displacement terminals with colored marking in accordance with EIA/TIA 568 A and B, connection-friendly if the twisted section is observed for the connection wires to a maximum of 13 mm, Sufficient distance between the connection terminal and the shield contact point on the printed circuit board, reduces the possibility of a short circuit between the braided shield and the connection wires, Cat .6A (ISO/IEC) Class EA (ISO/IEC) 500 & Cat.6A versions with contact overbending protection: >750 mating cycles with RJ45/RJ11/RJ12 plugs, front panel printed with connection socket numbers, sheet steel housing, light gray (RAL 7035) or black powder-coated, shielding hood made of stainless steel, cable strain relief with enclosed cable ties without screws and special tools, horizontal circuit board, potential connection via an enclosed PE cable, tool-free attachment of the shielding hood (shielded version), design: 16 x RJ45 shielded, color: light gray RAL 7035, MPP16-HS K Cat. 6A (ISO/IEC)
... more
Number of sockets / couplings 16
Suitable for number of sockets / couplings 16
Connector type RJ45 8 (8)
Shielded yes
Category 6A (IEC)
Connection LSA
Number of height units (HE) 1
Colour gray
RAL-number 7035
Mounting 482.6 mm (19 inches) installation
Height 44 mm
Width 482.6 mm
Depth 100 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Patch panel MPP16-HS Category 6A RAL7035 - Patch panel copper 16x RJ45 8(8) J02022A0050"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.